100.41 USD (15,052 JPY)
Delivery Information
-
Please select product form first.
FITMENT
-
YZF-R1
09-14
-
YZF-R1
15-17
-
MT-09
13-16
-
XSR900
16-17
See all
YAMAHA
Product detail
Material: made of titanium
Shape: interior hexagon
Quantity: 5 (long) pieces
**Color of the image 1:Maziora blue (anodic oxidation treatment) is applied.
*The shape and the number of bolts are different depending on the model.
*Images may contain other colors.
*Old type may be included in the images.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..
* This product will be made after an order, We will notice currect shipping time after we recieve an order.
* This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
It is effective in stabilizing the mobility and stopping power by reducing the weight of the rotating weight under the spring.
The main feature of this product is that it is made of Ti-6Al-4V alloy material, and the threaded part is manufactured by rolling using a method called "forging", which is rare for Ti-6Al-4V bolts.
"Forging" and "rolling" products exceed the strength of the material in tensile strength, which is particularly important, and have made it possible to maintain the optimum quality of bolts.
The company has also contributed to Japan's cutting-edge industrial technology by winning numerous races in the harshest racing conditions.
<
Anodic oxidation of titanium is a surface treatment in which the surface crystals of titanium react with oxygen in an aqueous solution to form an oxide film [TiO2].
In this state, the oxide film is stable with a thickness of a few nanometers on the surface, preventing galling and burning of bolts, and the stable oxide film also acts as a corrosion protection against electrical corrosion.
<
Cutting, the process of "cutting" a screw with a lathe.Rolling, how to "push out" by rolling press.
In the case of cutting screws, the top of the thread and the bottom of the screw are at an acute angle, causing the screw to bite into the counterpart, resulting in seizure and galling.
The top and bottom of the screw have a beautiful curve because the screw is pushed out by pressure.
The "surface" made by rolling is hardly aggressive to the other side, so it is difficult to cause seizure even under high load.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
New Custom Articles
