■Valve Type: H7

[Material]
Heat sink: metal

[Weight]
Valve: 89g(H4)
Controller: 53g

[Size]
Controller Dimensions: 47 x 26 x 17.5mm

[Specification]
・Waterproof type
・Brightness: 2500LM
・Brightness at light collection: Over 35000cd
・Power consumption: 18-20W
・Ballast: Normal 60°C - Max. 90°C (heat resistance temperature of terminal socket and harness: 100 degrees or more)
・Heat sink: Normal 50 degrees - Maximum 75 degrees
・HI beam: Approx. 38000-42000cd / LOW beam: Approx. 8200-9800cd

[Set components]
・LED Headlight Bulb
・Ballast Unit

**The ballast and heat sink of this product will be high temperature.Please handle with care.
The lens may not pass the inspection due to lens cut, fogging, or lack of light gathering ability.
*Always adjust the optical axis after installation.
*This product is for DC power supply only.
*Please avoid using this product on vehicles with AC headlight power supply, which is common in minibikes below 250cc, as it may cause problems such as flashing.
*Product photo is for reference only.May differ from actual product.
*The installation of this product requires a high level of expertise.Please ask a specialized motorcycle shop or dealer to install the product.

*Images may contain other types.
*Installation image is for reference only..

This product was developed on the premise that it can be housed in the headlight case of medium to large-sized naked bikes of 250cc or more, and succeeded in downsizing by further evolving the high-performance digital circuit.
The weight has also been reduced from the previous 78g to 53g!
It is also waterproof.

<M-SOUL LED headlight has 30% more illuminance than halogen bulb and enough irradiation distance, while power consumption is 18W-20W.
It is recommended for old vehicle with old power generation system, big scooters with a lot of electric decoration, and mopeds with low power generation.

<The compact design allows you to store all the bulbs and controllers in the headlight case of old vehicles.
To install, simply insert the LED headlight socket into the headlight socket!
No need to rewire or add any relays!

<With HI beam: Approx. 38000-42000cd at LOW beam: Marks about 8200-9800cd!
(Inspection at Musashi)
15000cd or more at HI beam / 6400cd or more at LOW beam)

<The valve section uses a copper heat sink for high heat dissipation.
It also has 4 heatsink wires to further improve cooling efficiency.
It is also recommended for old 2-stroke vehicles as it saves power (22W to 18W).

Experiment!!!??
(Over 15,000 CDs)

The test vehicle marked the standard values for brightness (cd) and optical axis!