There is no external temperature gauge, there is not a water temperature gauge whether it is because Cost is cut to Meter of my NC 750X, (Water temperature only warning light) In fact I wanted a water temperature gauge, but I did not have anything I can connect with One-touch like an OBD? Connection, so it is troublesome to install, so I bought this product as outside air Thermometer. Small Type but the display part is Large, with Back light you can see the numbers clearly. It seems that its color changes at low temperature and high temperature, but I think that there is probably no opportunity to see it. Waterproof performance for Motorcycle (Equivalent to IPX 7) There may be no choice because it seems to be strong enough to withstand the vibration, but I think that the price is a little expensive as it is only the function of Thermometer. I wish I had at least a voltage indication.
View Detail
- Instock
31.96 USD (4,977 JPY) 33.39 USD Save 4%
Delivery Information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
Product detail
Size: Width 42 x Height 25 x Height 10.8 (mm)
Waterproof performance equivalent to IPX7
**Dew condensation may occur on the inside of the panel depending on the change of the outside temperature.
*In the case of simultaneous installation with high voltage parts such as ignition system enhancement parts and H.I.D., there is a possibility of causing display trouble by the influence of noise.
*For bikes with 4st engine DC 12V battery.Cannot be used for 2-stroke engines, AC bikes, 6V bikes, and battery-less bikes.
*The heat resistance temperature of the harness is 80°C.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
.
Digital thermometer with compact body.
The power supply can be turned on and off in conjunction with the ignition key.
With backlight illumination.
Measuring temperature range -9°C to 150°C.
The backlight switches to red when the temperature is below 5 degrees.
Since it is an external sensor type, it is possible to measure the temperature around the air cleaner box and the battery.
By connecting with the optional balance sensor (72816/93062), it can be used as an oil temperature gauge.
The backlight switches to red when the oil temperature exceeds 120 degrees.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Jul 25, 2017
I searched with a water temperature gauge and bought it
The water temperature gauge does not correspond and it seems to correspond to the outside temperature temperature oil correspondence
I think that the thing itself is good, but because the oil temperature and the water temperature are searched with one by product search, I want Shop to properly separate it
Fittingetc. Should I buy another after all if I bought it?
I want to use Bolt which it seems to buy and process it Somehow I want to use it in GS
Jun 23, 2017
Since I installed the AquaProver's Compact voltmeter, I wanted an Oil Temperature Gauge and bought a Compact temp meter (For Repair Temp Sensor also purchased at the same time). As well as a voltmeter Compact Because it is compact, you can set it without troubles at the mounting location. Wiring was easy and I set it in about an hour. I thought it would be a little cheaper because I bought Sensor and Set, is it such a thing?
View DetailNov 20, 2016
It is not troubled by the mounting position just as a Compact!
The Temp meter is exactly Compact, but Monitor display characters are Large and visibility is good. Also, of course it is lightweight so we were not at all troubled by the mounting position. In addition, Oil Temperature Gauge is used in combination with optional oil temperature sensor. There is no opening function but I am satisfied!
View DetailNew Custom Articles
