빠른 송과 뛰어난 품질 그리고 포장에 감사합니다.설치시 제품 가공이나 불필요 과정이 없이 쉽게 서치가 가능했으며착용시 무엇보다 편안함이 제공되었습니다물론 스타일도 한층 업이되어 깨끗해보이고요.소모품 특성상 추가 구입의 여지가 있어요
View Detail
- Sale
- Instock
20.72 USD (3,238 JPY) 21.68 USD Save 4%
Webike Point: +32 pt
(0.2 USD)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
MONKEY
(Injection vehicles)
-
12VMONKEY
(Carbureted vehicles)
-
LITTLE CUB
(Injection vehicles)
-
LITTLE CUB
(Carbureted vehicles)
See all
HONDA
Others
Open Fit Model Information Table
-
Tack roll sheet made by SP Mukawa
-
SP Takegawa Street Mini Seat
-
SP Takekawa custom seat for Monkey *Except TL seat
-
SP Takegawa Tack Roll Sheet (Middle Type)
Product detail
[Size] S
[reference size]
・Entire cover: 600mm x 530mm
・Seating surface: 350mm x 300mm
**In order to install the seat cover, the seat shape must exceed the above seat cover reference dimensions.However, depending on the installation method, even if the seat does not exceed the reference size of the seat cover, it may be possible to install the seat cover by pulling the elastic mesh more strongly and fastening the Velcro tape to prevent it from falling off.
*Depending on the shape of the seat, the elastic mesh on the side of the seat may not be tensioned, and the seat cover may float, or the seat may need to be drilled.
*If you sit on the seat right after it gets wet, your clothes may get wet.Even if the surface is dry, there may be moisture inside.Remove the moisture with a towel, etc.and make sure that your clothes are not wet before using it immediately.
*Because this is a universal product, please refer to the dimensions and shape of the vehicle seat to be installed in the image and purchase.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.
.
The seat can be changed to a seat with excellent air permeability and cushioning by simply installing it over the stock seat.
In order to correspond to various seat shapes, elastic mesh is used for the side of the seat cover, and rubber products are used for the seam allowance tape to increase the versatility.
[Features]
■Adopt a three-dimensional mesh with excellent grip and breathability moderate
The seat surface of the three-dimensional mesh is made of a special finely woven mesh to ensure a proper grip.
The three-dimensional mesh creates a space between the hip and the seat, which allows the wind to blow through, preventing uncomfortable steam and heat transfer from the seat.
It drains well when it rains and prevents water from penetrating rain gear.
■Specially manufactured mesh reduces vibration and improves cushioning
The inner mesh woven by a special method has a spring effect, which reduces vibration transmitted from the road and provides excellent cushioning.
It reduces the fatigue that occurs during commuting and long touring, and you can enjoy comfortable riding.
■Highly designed seat cover with two types of mesh sewn together: elastic mesh and three-dimensional mesh
The side of the seat is made of stretchable mesh fabric for better fitting with the seat, and the seat surface is made of three-dimensional mesh with excellent air permeability and cushioning.
Two types of mesh are sewn together to enhance the design and keep the image of the custom bike.
[Regarding the installation of stock seats in the subject vehicle]
SUPER CUB 50, LITTLE CUB, SUPER CUB 110, CROSS CUB For installation to the stock seat, by raising the seat, the seat cover can be installed and the Velcro tape can be fixed to prevent it from falling off.
For installation on Monkey (carburetor) (injection), it is necessary to remove the seat in order to fix the Velcro tape to prevent it from falling off.
[About SP Takegawa's seat installation]
It can be installed to SP Takegawa's Street Mini seat and Tuck Roll seat for Monkey.
For Tuck Roll Sheet (except middle size), there is a procedure for installation because of its thinness.
・Installation Procedure 1
Pull the elastic mesh tightly and fasten the Velcro tape.
・Installation Procedure 2
Tuck the excess rear stretch mesh between the seat brackets on the back of the seat.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA LITTLE CUB (Injection vehicles), HONDA LITTLE CUB (Carbureted vehicles), HONDA SUPER CUB 50 (Injection vehicles), HONDA SUPER CUB 50 (Carbureted vehicles), HONDA MONKEY (Injection vehicles)
Installed on: HONDA CT125 Hunter Cub
Fits:HONDA LITTLE CUB (Injection vehicles), HONDA LITTLE CUB (Carbureted vehicles), HONDA SUPER CUB 50 (Injection vehicles), HONDA SUPER CUB 50 (Carbureted vehicles), HONDA MONKEY (Injection vehicles)
Aug 1, 2022
Comparison with Komine products
After installation, I did a day-touring trip of about 500 km.
(*CROSSCUB110, replaced by Seat of JA45.)
Having previously used a similar product made by Komine, I leave you with my comparative impressions.
Both are easy to install, and I don't think there is any difference in fit between the Large and the Large.
Airflow during driving was not much different because of the leg shield? Not much difference.
Cushion nature is not to your liking at first. A sense of change I preferred the Komine one because it is larger than the Takegawa one. However, in fact, Takegawa's Mesh fabric is more comfortable for my buttocks when I use it for a long time. The reason is that Komine's mesh fabric is larger in diameter, and I feel a little bit of damage when I run long distances.
Both of them are good because they do not steam easily, but as for Takegawa's product, unfortunately, it is easy to slide forward during Brake sudden braking.
Helpful?
Fits:HONDA LITTLE CUB (Injection vehicles), HONDA LITTLE CUB (Carbureted vehicles), HONDA SUPER CUB 50 (Injection vehicles), HONDA SUPER CUB 50 (Carbureted vehicles), HONDA MONKEY (Injection vehicles)
Jul 15, 2022
I didn't want my OEMSeat to chafe, so I was riding with a synthetic leather Seat made by Mukawa covering it. As expected in this heat, my buttocks were soaked in sweat even after about an hour's ride.
This product is the answer to that. Easy to install, SizeExactly, no Seat opening/closing problems. As an added bonus, it dries relatively quickly because the rain passes through the Mesh.
However, where it slides, the Mesh is so tough that it hurts my buttocks.
Helpful?
Fits:HONDA LITTLE CUB (Injection vehicles), HONDA LITTLE CUB (Carbureted vehicles), HONDA SUPER CUB 50 (Injection vehicles), HONDA SUPER CUB 50 (Carbureted vehicles), HONDA MONKEY (Injection vehicles)
Mar 31, 2022
Prevents buttocks from steaming in summer
However, it is slippery when Brake is applied.
Also, the price is too high.
Helpful?
Fits:HONDA LITTLE CUB (Injection vehicles), HONDA LITTLE CUB (Carbureted vehicles), HONDA SUPER CUB 50 (Injection vehicles), HONDA SUPER CUB 50 (Carbureted vehicles), HONDA MONKEY (Injection vehicles)
Installed on: HONDA CT125 Hunter Cub
Mar 20, 2022
Absolutely love the Takegawa Mesh seat cover for my 2021 Honda Trail 125. Really nice fit and takes the "burn" out of the stock seat. Highly recommend!
View DetailHelpful?
New Custom Articles
