The hole for the pad is too small for installation.
Garbage
- Instock
10.69 USD (1,684 JPY)
Webike Point: +17 pt
(0.1 USD)
Delivery Information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
KAWASAKI
Open Fit Model Information Table
-
FX400R
ZX400D [stock number]43082-1062 [model name]ZX400-E1/ZX400-E2/ZX400-E3
-
EN400TWIN
EN400A [Genuine part number]43082-1062 [Model name]EN400-A4
-
GPZ250R
EX250E [stock number]43082-1062 [model name]EX250-E1
-
FX400R
ZX400D [stock number]43082-1062 [model name]ZX400-E4/ZX400-E5
See all
KAWASAKI
Product detail
[Specifications] Front and rear shared
[Material] Copper-free (copper-free) polished material
[Compatible stock part number] 43082-1029, 43082-1030, 43082-1057, 43082-1061, 43082-1062, 43082-1080, 43082-1167, 43082-1194
■Acquired ISO9002 certification
**There may be changes in product specifications due to the manufacturer's reasons..
* The image is only for reference. The image shown may differ from the actual product.
[Standard pad features]
The standard pad is a popular model with excellent braking power, controllability, friction resistance and low rotor aggressiveness that surpasses the standard pad.
In the U.S., environmental regulations to reduce the copper content in automotive brake pads to less than 5% by 2021 and less than 0.5% by 2025 are coming into effect. It is expected that copper regulations will spread to other parts of the world, including Japan.
Ahead of this trend, NTB has been working on the development of a copper-free polishing material that complies with copper regulations, and has now completed a copper-free polishing material with the same level of braking power, aggressiveness, and durability as the current product.
Therefore, we will switch to the new material products as soon as the stock of the existing products runs out.
[Standard shoe features]
Compared with conventional materials, this material maintains braking force and suppresses the generation of friction powder.
JIS standard ADC12 die-cast aluminum is used, which is equivalent to stock parts.
The deterioration rate of N.T.B shoe springs is approximately 1.2 times than that of stock springs (calculated based on a fatigue test of 100, 000 expansions and contractions).
The material is prepared to be within the range of the international standard coefficient of friction grade FF (FE for stock).The optimum "effect" is achieved not only at room temperature but also at high temperature.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:KAWASAKI VULCAN 800 (VULCAN400) VN800A [Genuine part number]43082-1080 [Model name]VN800-A2/VN800-A3, KAWASAKI Vulcan 400 (VULCAN400) EN400B [Genuine part number]43082-1062 [Model name]EN400-B2/EN400-B3, KAWASAKI Vulcan 400 (VULCAN400) EN400B [Genuine part number]43082-1062 [Model name]EN400-B1, KAWASAKI VULCAN 1500 CLASSIC TOURER (VULCAN400Classic tourer) VNT50G [Genuine part number]43082-1194 [Model name]VN1500-G1/VN1500-G2, KAWASAKI VULCAN VN400A [Genuine part number]43082-1080 [Model name]VN400-A2/VN400-A3/VN400-A4/VN400-B2/VN400-B4
Jul 6, 2022
vn1500c VULCAN400 Pad hole is not usable Small!
Helpful?
New Custom Articles
