Very compact yet clear enough to read the display under any kind of light. Installation is also a breeze. Thank you very much! Very happy with my purchase.
View Detail
- Instock
21.76 USD (3,388 JPY) 22.48 USD Save 3%
Webike Point: +34 pt
(0.21 USD)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
Components: Double sided tape (30 x 20mm)
Power Supply Harness length: 1500mm
■Highest value memory function
[Product Specifications]
・Dimensions: 42mm (W) x 25mm (H) x 10.8mm (H)
・LCD: Normal LCD
Backlight:White / Red LED (Red indication at low voltage)
・Operating voltage: DC 7.5V-18.0V (meter power input)
・Monitor voltage: DC 7.5V-18.0V (measuring voltage)
・Current consumption: OFF = 0mA, ON = 50mA max
Operating temperature:From -10 to +60 degrees
Waterproof performance:Equivalent to IPX7 (*Protection rating where water will not enter even when temporarily submerged in constant water pressure.)
**2-stroke bikes are not compatible due to high noise level.
*This meter has a waterproof structure, but condensation may occur inside the panel due to sudden changes in outside temperature.
*When the parts which generate high voltage such as the strengthening parts of the ignition system and the H.I.D. unit are installed at the same time, there is a possibility to cause display trouble by the influence of noise.
*Only for DC12V bikes.This product cannot be installed on 12V AC bikes, battery-less bikes, and 6V DC bikes.
*There may be changes in product specifications due to the manufacturer's reasons.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
.
This is a digital voltmeter that can be turned on and off in conjunction with the ignition key, and can directly measure the voltage between the battery terminals.
By changing the connection position of the measurement wiring (red line), it is possible to measure voltages other than the battery voltage (accessory power supply).
White backlight allows for nighttime visibility.
It also has a battery alert function that switches the backlight to red when the voltage is below 12V.
When the meter power is off, the current consumption is 0mA.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Installed on: YAMAHA TRACER900
Jul 28, 2022
Mounted on ZX-6R G type
I had a D-UNIT WR from DAYTONA before.
I installed it on this.
Since D-UNIT has a built-in Relay, I connected the AttachmentPower Supply Cable and the Power Supply Cable of this voltmeter together by crimping them together.
Helpful?
May 30, 2022
The price is reasonable and it is useful to know the voltage in real time.
View DetailHelpful?
Mar 13, 2022
I have used it on 3 motorcycles and 1 car and it has not broken when used on motorcycles and my car has been through 2 mid-summer and it has not broken at all. The waterproof treatment is very clean and the product itself is solid, not cheap. Wiring is also very easy, so I highly recommend it.
View DetailHelpful?
Feb 11, 2022
More peace of mind at this price!
In the winter, I was concerned about the battery voltage because I wear electrically heated Wear.
Since it is a Liter machine, I don't think I need to worry about it so much, but since it is invisible, I am a little worried.
It's not expensive, so I installed it as a DIY project.
I have a DUnit set up, so I just need to connect the acc wires from there to the battery. The installation itself can be done in 10 minutes. In order to hide the wires, I removed the cowl and put it under the tank, and struggled for about an hour.
The three wires from the power supply are thin and RoseRose (not bundled into one pc), so I used Vinyl Tape to tie them together. If I don't, I'm worried that they might break under the tank.
I used Surface Fastener to place it near the meter, and it's compact and fits well.
Now that I can visually check the voltage, I feel more secure.
Helpful?
New Custom Articles
