Multi Bar Holder Stem Hole Clamp Short Low Type

Fits:HONDA CBR500R , YAMAHA YZF-R3 , HONDA CB300R , YAMAHA YZF-R25 19-21 RG43J, HONDA NSR250R 89 MC18 [Frame No.] MC18-1100017 to 1119489

It is the best Smartphone Holder bar.

Very Good

Dec 20, 2021

You can't install this item only with Single Item.

You will also need Mount Kit Multi Bar Holder item number 95442.

Quantity anyway.:I also wish I could sell it in Set.

The length is Short and easy to use, no problem.

Helpful?

Fits:HONDA CBR500R , YAMAHA YZF-R3 , HONDA CB300R , YAMAHA YZF-R25 19-21 RG43J, HONDA NSR250R 89 MC18 [Frame No.] MC18-1100017 to 1119489

Excellent

Oct 28, 2021

Installed on CBR650R

I installed it with the StemMount Kit (sold separately).

The Stem Bolt on the CBR650R is slightly recessed and will interfere with the Top Bridge if installed as is.
I put a proper Washer on it. (About 4mm worth)

I think it's good that you can choose between long and short ones depending on your preference.

Helpful?

Fits:HONDA CBR500R , YAMAHA YZF-R3 , HONDA CB300R , YAMAHA YZF-R25 19-21 RG43J, HONDA NSR250R 89 MC18 [Frame No.] MC18-1100017 to 1119489

Quite narrow when installing 2 ports + Smartphone Mount

Very Good

Aug 7, 2021

[How is it used?
It was installed in New Model GSX1300R HAYABUSA.
Since smartphone map apps are becoming essential for Touring
Smartphone Holder is required.
For installation
DAYTONA DAYTONA:95444
Mount Kit Multi Bar Holder
https://www.webike.net/sd/23315099/
I used the
Note that the caliber is different from the previous year's formula.

Was the one you received as per Image?
It was approximately as Image.
However, when I try to put two ports side by side and install a short Smartphone Holder, there is a little narrow feeling.
It may have been good to have a longer model with more room.

Was the installation difficult?
It was a pontoon.
The installation itself was very easy as it was done with just one Hexagonal Wrench, including the installation of the Multi Bar Holder that I mentioned above.
The process took less than five minutes.

How was your experience with it?
It works fine
It was very accurate as it did not come loose or rattle after installation.

[Included Parts:were they on?
There was no particular Instruction Manual.
The use is also Simple, so it is not necessary.

[Was there anything that disappointed you?
There was nothing in particular
If I had to say, it's pretty narrow when installing 2 ports + Smartphone Mount
If there is something else you want to Mount

Other items that would be helpful
[ITEMS TO BUY TOGETHER
DAYTONA DAYTONA:95444
Mount Kit Multi Bar Holder
https://www.webike.net/sd/23315099/

Smartphone Holder of your choice

USB Power Port of your choice

Quite narrow when installing 2 ports + Smartphone ...

Helpful?

Fits:HONDA CBR500R , YAMAHA YZF-R3 , HONDA CB300R , YAMAHA YZF-R25 19-21 RG43J, HONDA NSR250R 89 MC18 [Frame No.] MC18-1100017 to 1119489

Excellent

Mar 1, 2021

I used it on my SV650X.

I used it because the SV650X does not have a mountable part.
Because the thing had used the model number difference of the same Manufacturer before, there was no anxiety especially.

Because it is the Short of the Low type, it is not possible to mount too much, but if it is about the Smartphone Holder and the drrorecorder
It was enough.

By the way, the SV650X has
DAYTONA DAYTONA:95442
Mount Kit Multi Bar Holder
can be used.

Helpful?

Fits:HONDA CBR500R , YAMAHA YZF-R3 , HONDA CB300R , YAMAHA YZF-R25 19-21 RG43J, HONDA NSR250R 89 MC18 [Frame No.] MC18-1100017 to 1119489

Purchased to install the Smartphone Holder

Very Good

Dec 17, 2020

Used with Ninija250SL
I bought this to attach my Smartphone Holder
It was difficult to see the screen of the phone without peeking because the position becomes a little low, but I think that it is not a problem if it hears it by the ear at the same time as Income.