I occasionally find out that GEAR does not know how fast it is when I'm driving with a dull red, so I tried installing it.
Since it is exclusively for the car model, it will not be difficult if it is done according to Instruction Manual. Just remove the Front cover and insert the Coupler. The problem is to force Wiring into the narrow Front cover originally, so there is also worry that Wiring will not break afterwards. I also tried to attach Body to the base of Handlebar, Left Side of Meter, but because it faces diagonally, I installed it around the LeftGrip Switch of Handlebar. Depending on the sun's rays there are things that are not easy to see. Try running and SHIFT UP then Time Lag is there but OK range. When Downshift, SHIFT UP will be displayed. I will return soon but I am a little dissatisfied. If the price is cheaper a bit more ...
Other Company Product So compromise is necessary.
SPI-K46 Shift Position Indicator Exclusive Kit [for 2014- Z1000]
Product # 11354
3 (1 reviews)- Sale
111.46 USD (16,940 JPY) 116.52 USD Save 4%
Delivery Information
If manufacturer have in stock, ships around 11th Feb. 2025
Product detail
[Specification]
・Rated voltage: DC12V
・Outer diameter dimension: W25.5mm x H30.5mm x D15.5mm (*excluding protruding parts)
[Components]
・SPI-110 C1 main unit x 1
・Model Specific Harness x 1
・Various double-sided tapes
・Instruction manual
*Components vary by kit.
**When the clutch is depressed while driving, the display shows a gear other than the one in which the clutch is engaged, but this is not a malfunction.
*Prioritize safety while driving and do not be careless in front.
*Please do not use non-resistive spark plugs.If you use a plug without resistance, noise may be generated and the rotation signal may not be input correctly, so please use a spark plug with resistance.
*Please put the attached double-sided tape on the back side of this product to prevent water from entering because there is a switch.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*All vehicles that have been tested by Protec are stock.There is a possibility that a problem may occur if the vehicle is equipped with aftermarket parts other than stock parts.
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation..
●All the necessary parts are included in this kit!Easy installation with special harness!
It can be installed easily without soldering because it uses a special harness for each model.
*The vehicle-specific harness has a 12V (+) service terminal for easy installation of the CS-550 burglar alarm.
●Compact design!
The main unit dimensions are W25.5mm X H30.5mm X D15.5mm (excluding protruding parts), a compact design that does not interfere with installation around the meter.
●LED display for high visibility!
Equipped with a dimmer sensor [automatic dimming function].The brightness of the LED is automatically adjusted to be brighter in the daytime and darker at night to improve the visibility of the digital numerals.
●Equipped with a shift up indicator!
Since the rpm can be set arbitrarily, it can be used for everything from narrowing to preventing over-revving.The blue LED will light up when the rotation is higher than the set value.
*You can re-register as many times as you like.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.