The custom-like anchorless design gives a stylish look to the entire vehicle. There are four types of leather patterns to choose from. The seat base is made of ABS (reinforced plastic), which is strong and durable. Equipped with a seat catch as standard, the lock-on design allows only locking operation. All types are designed with approx. 20mm of anchoring to improve footing and create a sleek and stylish form. ■The particular seat form <> The front section is extended 15mm forward to cover the fuel tank compared to the stock section, to emphasize the line that flows to the fuel tank. The side section is designed to be sharp without breaking the line with the fuel tank for a better holding feeling during cornering and knee grip. The rear section has a flat finish to reduce fatigue over long periods of riding and to ensure traction under acceleration. <> The rear view is accentuated by the flowing form that does not spoil the overall style of the vehicle, while realizing an excellent holding feeling when a pillion rider is riding.
[W special seat belt] Pre-assembled seat belts to best fit the Stylish Seat Complete. ●The mounting bracket is based on the Z2 form. ●Specially designed button head bolts are used to secure the belt roll back. ●A guide plate is provided to protect the belt's rewinding area and prevent the belt from sliding out. ●Total length from mounting bracket fixing hole to mounting bracket fixing hole: approx. 410mm
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Looks nice in the photos, but this PMC seat came with creases in it, and is lower than the standard seat. There are TWO oother big issues with it - the belt I got does not fit, and has a sharp 'nut and bolt' that protrudes making it unusable. So if you want to use the strap, will not work See the photo attached. And it is like sitting on concrete - VERY hard. It does look good but cannot recommend.View Detail
[How is it used? Normal seat of ZEPHYR750 is soft, but front and rear, Quantity:Pair (for Left and Right) If you don't have a good knee grip, your hips will slip during Curve. My friend was wearing PMCSeat, and I was told that NORMAL ZEPHYRSeat is very slippery, so I replaced it.
Was the one you received as per Image? PMC Seat, Butt Hold Well Before and After Quantity:Pair (for Left and Right) It is not easy to slip on the Curve, and it is very stable and secure when driving the Curve.
Was the installation difficult? It's easy, the seat belt is also easy, you just need a driver and a cone.
How was your experience with it? The ride is a little stiff, but the stability of the body is good and you can operate the Curve with ease.
[Included Parts:were they on? Seat belt was attached
[Was there anything that disappointed you? PMC's Seat can be ridden with ease, and the sushi is smoother than before.
Other items that would be helpful Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
It's not extremely cheap compared to OEMs. It looks very Parenthesis nice. I'll enjoy it for a while without wearing the Belt. The only thing that bothers me is that it's a little stiff. It's as hard as a tatami mat. At the time of writing this, it's the first day of purchase. Maybe it will get softer and softer. Overall, it is a good product. The Base of the Seat looks and feels the same as the OEM.View Detail
There is nothing compared with other companies' products, but Position is definitely better than OEM Product. I am about 160 heights, but I felt that ease of riding, Position is definitely better than OEMSeat. Although I think that other people's comments are also good, I think that it is probably a person whose height is bigger than me, but most people think that Position got better regardless of height. I think that the price is also cheap and the quality is also a good product. OEM Product should be made with Position for everyoneView Detail
【What made you decide the purchase?】 It is not a special reason, but it is PMC's thing. 【How was it actually used?】 DOREMI's replacement from the same Z? Seat. It was a small car body ZEPHYR 750, so I wanted to sit a bit behind, so I tried to replace it here. Because the price is not so high, purchase from a trial feeling. Feeling a little stiff seating. In the middle to long distance the butt hurts, but this is useless. SeatFront has a thickness, so the seating position will naturally be behind that of Mr. DOREMI as I thought. As a personal impression, this Position is much easier to manipulate Motorcycle. As they are apparently the same Z Type, even if they are exchanged, only the principal knows the surroundings without noticing it. Seat base There is also a thin Sponge sheet on the back, making this is better for making. I like the making and seating feeling very much. 【Was it difficult to install? (Hard parts case)】 There is no difficult thing. It was easy to install without machining. Even with desorption to the car body, there is no feeling that it is hard to wear as in other impres. 【Please tell me the point of installation and hang (in the case of Hard parts)】 Installation of Seat belt is not difficult. It is OK if you open a standard hole with a dusty object from the back. Make a Small hole as Guide, + Driveretc. I will spread the hole in. Then just push in the Belt mounted Bolt and stop it, there is no failure. 【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ] [Is there anything I was disappointed about?] None. 【Hope for Manufacturer - Please let me know if you have any improvement points] Bolt holding Seat belt and gold fixtures too long. The part that protrudes is hidden in the Gold item - - ) I will bite into Seat Outer Cover and wonder if it will tear. It is only a few millimeters, but I think that it is good to deal with it. 【Have you compared items?】 As mentioned above, Mr. DOREMI's Z? Seat. [Others] I am 176 cm tall. Take the same model "I want to sit back" I think that it is very good for those who think.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!
?
