I buy it to replace oem master cylinderWork good beter than oemI gonna instal steel brake lines i belive it will work even beter
View DetailRadial Brake Master Cylinder Kit [Vertical Φ17 Radial Pump Brake Master]
Product # 79889
4.5 (69 reviews)118.23 USD (18,478 JPY) 131.16 USD Save 10%
Delivery Information
-
Please select product form first.
FITMENT
-
CBR1000RR
04
-
CBR600RR
03-07
-
CBR1000RR
08
-
GSX-R750
08
-
ZZR1400 (ZX-14)
06
-
ZX-6R
08-12
-
ZX-10R
11-12
-
Z1000 (water-cooled)
10-12
See all
KAWASAKI
-
Universal
Product detail
・Piston diameter: Vertical Φ17 (11/16-Inch) [*Equivalent to horizontal 14mm]
・Compatible handlebar diameter: Φ22.2
・Lever adjustment (6-way adjustable)
[Components]
・Brake switch (2-pole flat terminal type)
・Aluminum tank bracket
・Clamp holder (with mirror hole (M10 x P1.25 right handed screw))
**The following information is different from the previous model in the 2013 catalog due to specification changes.
・The reservoir tank can now be removed from the top.
・Clamp without mirror hole and mirror hole filling bolt are not included.
・The repair kit for the repair parts is different.
*Banjo bolt (M10 x P1.25) sold separately.
*Because the banjo bolts are located on the lower side, it may be necessary to replace the brake hose (recommending using stainless mesh hose for a more direct feel).Please check the instruction manual in advance.
*For Kawasaki models that use a switch box with the throttle wire coming out from underneath, it is necessary to change the switch box and replace the switch box with a thinner high throttle kit because the brake hose comes in contact with the switch box.
*Be sure to confirm that sufficient mounting space is available by referring to the main unit dimensional drawing.CBR600RR (03-05), GSX-1300R HAYABUSA (99-08), BANDIT 1250S (07-), YZF-R1 etc. cannot be installed because the master touches a part of the body (cowl etc.) when turning the handlebar.
*When removing the brake hose, use a hose that does not come into contact with the bottom of the brake lever.(This may cause deformation of the brake lever and result in a serious accident)
*Do not use silicone-based DOT5 (BF5) brake fluid.
*When using the stock brake hose, the brake hose may expand when the brake lever is operated, and the radial master cylinder may not perform at its full potential.
*In order to reduce the braking loss caused by the expansion of the brake hose, it is recommended to replace the brake hose with GOODRIDGE or HIGH-SPEC LINE stainless mesh brake hose..
Here is the instruction manual.
[Repair parts]
.
Vertical radial master with direct operation feeling!
The direct feeling of radial operation is maintained, but the body is cast and the price is greatly reduced!
Piston diameter Φ19 (equivalent to 5/8" horizontal type) and Φ17 (equivalent to 14mm horizontal type) are available.
●Φ19 is compatible with horizontal type 5/8 inch, Φ17 is compatible with horizontal type 14mm.(*It cannot be used for other sizes.)
●For Φ22.2 handlebar.
●The lever adjustment can be 6-way adjustable.
●Brake switch (2 pole type with flat terminal), with aluminum tank bracket.
●The clamp holder comes with a mirror hole (M10 x P1.25 right handed screw).
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.