[Color] Pure Titanium [Silencer Size] ・Exhaust pipe diameter: About Φ43 ・Tail pipe diameter: Approx. Φ60.5 [Weight] 2.5kg [Specification] ・Assembly method: 4-1 ・The stock oil pan can be used ・O2 sensor compatible [Maintenance Data] ・Oil: Available: (Not available for 2007 and later model years) ・Element: Available ・Stock step: Available ・Pillion step: Available ・Center stand: Available
*Since the tail pipe interferes with the drain hose bracket, it is necessary to move the tail pipe and change the routing so that the drain hose does not touch it. *This is a competition model. *It is prohibited by law to drive on public roads with competition parts installed.Do not do. *Any claims for damage to parts after racing or sports driving on the circuit is not accepted. *Silencer and silencer band must be purchased separately. *About the pure titanium of the CLR exhaust, the pattern of the fabric at the time of the pipe manufacturing, a small wound, etc. have individual differences, but there is a little conspicuous one.Please note that this is an unavoidable thing on the specification of pure titanium, and is also a texture of pure titanium.The buffed and heat-coloring finishes are less noticeable, so if you are concerned about them, please choose that one. *There may be changes in product specifications due to the manufacturer's reasons.
Ultra thick exhaust pipe is sold separately.It can be freely combined with silencers of the insertion diameter Φ60.5! This product is sold as an exhaust pipe only.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
What made you decide to buy? I wanted a Hand Bent Full Exhaust System, but I didn't want a fancy burn color Because it was ideal Visual
How was your experience with it? It's a good way to get out of the carburetor, and with a little tweaking of the carburetor, it will be even better
Was the installation difficult? If you can remove the normal muffler, I think you can do it in one hour Small Clearance is pretty tight It looks like the '99 doesn't fit, but I was able to install it with no problem
【Please tell me the installation point and hang】 Temporarily install the exhaust pipes numbered 1 through 4 first The Flange nut is still at least hand-tightened Next, we'll insert the assembly There will be a grouping area on the Right Side from the Center Install the assembly so that the lower side of the assembly is horizontal When installed in the correct position, the projection of the oil pan comes to the center of the assembly part, so that it is an exquisite It is not hit by Clearance The end pipe is inserted and Silencer is added to the end of the pipe, and the clearance between the end pipe and the frame is changed to After securing the silencer, fix the silencer and tighten the flange nut to complete the process Flange nut tightening torque is 2 kg Degrease the exhaust pipe to prevent oil seizure
[Was there anything that disappointed you? I wouldn't go so far as to say it's a disappointment I wish the end pipe was a little more angled (direction of the take-up) [Accessories] Aluminum FlangeQuantity:1 Set of 4pcs., 8 Exhaust Spring, Tandem FootpegUp Stay (Quantity):Pair (for Left and Right) (e.g. "I'll be back") Instruction manual with photo Do you have any wishes or improvements you would like to make for the Manufacturer? Dare I say, bender scratches? I hope it doesn't have any marks like the lines attached vertically I don't mind, but …
[Do you have any products to compare it to? DT SilencerFull Exhaust of OHNISHI HEAT MAGIC system
What made you decide to buy? I wanted something from Hand Bent, but I had an unreasonable ideal that I wanted to avoid the fancy burnings Because, CLRExhaust System was ideal Visual
How was your experience with it? It has been a full exhaust system for kFACTORY until now, but Since both the exhaust pipe and the end pipe have become thicker, the goodness of the exit is felt
Was it difficult to install? (In the case of hard parts) It's not hard, you need Spring Remove or Socket wrenchetc But if you are used to it, you can do it in an hour, I think
What is the point or hang of installation (for hard parts)? Temporarily install 4 exhaust pipes and insert the 4-1 assembly part, but at this time Attach the 4 exhaust pipes to the Right Side from the center of the body There is a protrusion on the oil pan that may be the Guard, and the protrusion is the Center of the assembly It was able to be installed without any contact with the exquisitely clearances
Enclosed Material:4 Aluminum Flanges and 8 Stainless Steel Springs OEMTandem Footpeg 2 Plates for repositioning An Installation Instruction Manual was enclosed If you don't want to use it because of the O2 sensor hole, you will need a separate Blind plug
[Was there anything that disappointed you? Price, installation accuracy, visual, all are satisfactory
Do you have any wishes or improvements you would like to make for the Manufacturer? Another User mentioned it in the imprint There are vertical lines on my purchase that seem to be attached to the bending process I don't mind them, but I think they are better without them
[Do you have any products to compare it to? New Type of OHNISHI HEAT MAGIC Full Exhaust System with short end
It's Titanium and it's so light. Looking at this product in the image, a very thick Exhaust pipe Although it looks very lively, it actually wears When I try it I feel just fine. Spring and Flange are included Because O2 Sensor 's Bolt was sold separately, Carburetor Vehicles should think that you should be careful. With machine bended this curve is wonderful! It is good missing that you can imagine from the thickness
There was a vertical line in the Exhaust pipe Welded BEET was bogoboko I was worried whether to buy by looking at Review, Although there was a vertical line indeed, I totally I did not mind and the welding was amazing It was beautiful! In selling with Silencer-less COSPA was also a good product that could satisfy Large change.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!