Since the rear suspension was replaced, I installed it to prevent contamination
As the title suggests, it looks like a Gal arm and Parenthesis is good
It has a Chain Guard and of course a Sprocket Guard
It's rare, but it's possible to get your toes and hands caught in a fall and have them amputated, so it's a must in a race It's a safety measure, so it's better to have it on public roads than without
Because of the length of the Fender itself, mud splashes are suppressed considerably, so the rear suspension It's very helpful because it makes it harder for me to get dirty
Installation seems to be easy if you remove the Tire, but I had to take it off
If you jack up from the rear stand and the bottom of the engine, the suspension will extend to meet the Tire It gives you more space in the vehicle and you can manage to install it without having to remove the Tire
You don't have to remove the rear caliper as per the instruction manual, but The Hose Clamp must be removed and floated once
It is important to note that the clearance of each part after installation is narrow and the quantity:Pair (for Left and Right) If you don't check the centering of Fear
Recommends checking and adjusting the chain extension as well
After installation, put the engine on once in the state of being raised in the rear stand and let the Tire idle Check whether chain and Tire are not interfering with Axel on/Off (This is the biggest thing.)
I didn't cut corners and because I didn't do it, I just bought a test run and Chain interfered with it out of nowhere Some of the holes have been left out (Lol)
177.79 USD (27,600 JPY)
Delivery Information
This product is produced on order.
Usually takes around 1 and a half months to ship.
Product detail
◆ Material: FRP (Color: Black gel)
**FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..
* This product will be made after an order, We will notice currect shipping time after we recieve an order.
* This item can not be cancelled, returned nor exchange after placing an order.
Full coverage type rear fender with sprocket guard
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA VTR250 98- (MC33), HONDA VTR250 98- (MC33)
Jan 30, 2019
It's the best parenthesis and most practical for VTRs
Fits:HONDA VTR250 98- (MC33), HONDA VTR250 98- (MC33)
Oct 19, 2016
I purchased from the other Manufacturer 's Under Cowl that it was made for a long time.
If you remove Tire, it will be easier...
I installed it with lining clothes because it is a pain..
When the car bounces, it will inevitably interfere with the Accessory Case under Seat.
Because each one gets scratches, I cut off the bicycle Tube and stick it at the interfering position.
A little price is stretched but I think that it was good shopping.
Fits:HONDA VTR250 98- (MC33), HONDA VTR250 98- (MC33)
Sep 15, 2015
Installation is simple. Remove the original Guard and stop Brake hose If you also remove Screw, just put on it. Easy to remove.
The appearance is cool, and the dirt under Seat has also been improved somewhat. It looks rather dirty than the appearance Custom element is Large.
Tire makes things that are relatively big and big, but I can afford it at all.
Chains will interfere with steps etc.. As long as you do not mind, if you increase Sprocket to Large, not only the sound but also the Fender itself can be trimmed, so if you install it, it may be nice to turn on Sprocket Small.
I do not mind, so I'm attaching Large Yi.
New Custom Articles
