Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
*Concurrent installation with windshield and bikini cowl By combining with Chic Design Bikini Cowl, Sports Shield or stock windshield, you can get more windproof effect.In addition, the matching design with "Guyra Shield" is well considered, and it produces a sporty and characteristic frontal area. *It may not be able to be installed at the same time due to interference depending on the shape of the handlebar.Please check the clearance with the shield.
*Fits to models with mirrors under the grips (XL1200X Forty Eight). *Depending on the model to be installed, there is a possibility of interference with the tank when turning the handlebars.In this case, it is necessary to adjust the handle angle, replace the handle, or cut the interfering part. *Depending on the shape of the handle, the windproof effect may not be sufficient. *If the mirror is replaced with an aftermarket mirror, it may not be able to be installed due to the short thread of the mirror. *If the lever is replaced with an aftermarket one, it may interfere with the lever depending on its shape. *If the blinker is installed under the lever holder, it may interfere with the guard body.In this case, you need to adjust the angle of the turn signal or change the position of the turn signal. *This may cause scratches on the lever holder.It is recommended to use a scratch protection sticker to protect the product before installation.
Knuckle guard to protect rider's knuckles and fingertips from the wind. The shield body is made of polycarbonate, and the color can be selected from clear and smoke. The bracket is designed to be strong enough to prevent rattling even under high wind pressure, and is designed to be bolted on to the left and right mirrors.
・A bracket is inserted into the space between the holder and the clutch to stop the clutch from turning.
・The bracket shape on the brake side matches the shape of the master cylinder. It serves as a turnstile.
■Guyra Gauntlet Knuckle shield to protect rider's knuckles and fingertips from the wind.
Guyra means a suit of armor, and a gauntlet is a piece of Western armor that protects the arm from the fingertips. It is the only aero-protection that protects the rider's fingertips, which are the armor worn on the bike and require delicate operation.
The shield body with complex curved surface is made of durable 3mm thick polycarbonate. The high transparency does not spoil the lightness of the handlebar area.
Chrome-plated or black-painted mounting brackets with sufficient strength designed for each model. The shape is designed to prevent rattling even when subjected to high wind pressure, and is designed to bolt on to compatible vehicles.
A highly durable stainless steel screw, polycarbonate washer and lock nut are used for shield installation.
The design that does not compromise the balance of the vehicle The handle guard body has a depth of 80mm to provide clearance around the lever without feeling cramped. In addition, the shape that wraps around the bottom of the lever has windproof performance not only in the fist but also in the fingertips.
Specially designed cut lines are provided for each model to maximize wind protection.
■Easy bolt-on design to mirror holder Installation is quick and easy as it only needs to be tightened together with the left and right mirrors.
The mounting bracket is specially shaped to fit the brake and clutch area of each vehicle and also serves as a stopper. Therefore, even though it is a single point fastening, it achieves a robust fixation.
This product is designed to be installed on a stock vehicle, so if you have made any changes to the handlebar, such as to the master cylinder, you may not be able to install this product or you may not be able to get the sufficient windproof effect.
■Select clear or smoke according to your preference. The clear specification gives a fresh impression without losing the lightness of the handlebar, and the smoke specification gives a tighter impression by increasing the presence of the gauntlet.
■In case of having made the change around the handlebar, If you have modified the front brake hose or other parts around the handlebar, the brake hose may interfere with the gauntlet depending on the fixing direction.
■If your model is not in the lineup The models listed above have been tested and confirmed by Chic Design.
If your model shares the same parts around the handlebars as the models in the current lineup, it may be possible to install it even if your model is not in our lineup.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I bought it for winter protection in the Kanto area and never froze when used with winter Gloves, which are not that thick. Installation is also easy, as long as the RightMirror is co-tightened with the Mirror and the RightMirror has an Opposite Thread Screw. The Bracket is solid and the Screen is strong enough to touch. As is the fate of the SR400, the engine vibration is fine but shaky.View Detail
I bought it because I could not stand the strongest cold wave. When I put it on, it didn't look as bad as I thought it would, and I was more than satisfied with the Large effect. The cold wind hitting the fist is reduced, and I think that this is Large sturdy even without Grip heater. It is easy to install and remove, so I recommend it to riders who ride in the middle of winter.View Detail
It is a necessity in the middle of winter, but it cannot be surpassed by this alone. After that, Grip heater installation. Still cold, Komine electric heat Gloves device. It's still cold. It looks like the image of the armor. But I can't repair the damage if I stumble on it. If you buy the AcrylicGuard part cheaply, you may be able to fit it to any type of armor. However, in winter, in order to change into Long Screen of SEA BASSOEM Product, if you cut all the Handlebar as much as possible, it will hit Screen. You may need longer bolts to remove the Handlebar and fit it back in. Also, please make sure to periodically retighten the Acrylic and Handlebar parts to prevent them from coming loose.View Detail
Handlebar, Mirror, etc... not OEM, so it interferes with things a bit So I tried to add the Nut and it became good However, the Screen [Color] It's Smoke [Color] I bought Clear [Color] I repurchased SmokeView Detail
Motive for purchasing Around November, that it's getting colder, you should try it from around! And more than one person recommended it to me Well, let's give it a try! And I decided to buy it on the spur of the moment! It's a little bit expensive for what it is, but I thought it would be nice not to spoil its appearance I decided to buy it Good points All season glovesQuantity without Inner Gloves, even in the middle of winter:1pc. and I can stand it! (In Tokyo's 23 wards) It is not that it is not cold, but there is a feeling that the wind is prevented for Large, and the cold of the hand has eased considerably! It looks even better than I thought it would, and it's starting to look better and better Parenthesis! The sticker by CHIC DESIGN that is included with the product is also very nice Parenthesis is good! What I liked about it Not particularly The waiting period for my order has been longer than I expected, so next time I'll be able to order something like this I decided to buy the seasonal items early Installation difficulty Brake Side is easy to install as you only have to put the Bolt1 pc on it I was able to do it, but I removed the Clutch Side once, and from the back ScrewQuantity:The process of removing the 2pcBolt1 pc was a bit more complicated than I thought it would be, as I had to remove it It wasView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!