About quality and texture, I can confirm that the quality is great and that the material used is steel with a black finish.About the feeling of use, The feel when steering is noticeably lighter. A better looking and performing front wheel axle then the original Honda part with the black finish aligning with the black fork legs and light weight hollowed design assisting with less unsprung weight.Products to buy together, Kitaco have different length axles that can be used on the swing arm pivot and rear wheel axles and they can be added to your cart to further reduce the unspring weight on the Grom.Difficulty of installation, I can say the fitment of the front wheel axle for my installation was simple as access is straight forward and the nature of securing the axle between the lower fork legs is simple.Cost performance and comparison with other products, The pricing of the product is great. You receive an axle made from a quality material with a quality finish. There are no cheaper options with this lightweight design that I could find and the original Honda part is only sligthly cheaper..About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.
View Detail
25.08 USD (3,774 JPY)
Delivery Information
Temporarily out of stock.
Arrival date at our warehouse: around 1 and a half months
FITMENT
-
MONKEY125
All JB02/JB03/JB05 models (for front)
-
DAX125
All JB04/JB06 models (for front)
-
glom
All JC61/JC75/JC92 models (for front)
-
SUPER CUBC125
All JA48/JA58/JA71 models (for rear)
See all
HONDA
-
CYGNUS X-SR
(SEA5J)BF91/93,(SED8J)BF92/94,(SE44J)All 1YP/28S models,(SE12J)All 5UA models (for front)
-
CYGNUS X
(SE44J)All models of 1YP/28S, (SE12J)All models of 5UA (for front)
Product detail
[Size]
・Shaft length (length below the neck): 250mm
・Shaft Diameter: Φ12
・Hollow hole diameter: Φ5
[Shaft unit weight] approx.199g (stock weight 234g)
[Material] Steel (chromoly steel), black finish
■1 bottle
■Lock nut with flange included
**There may be changes in product specifications due to the manufacturer's reasons..
The axle shaft is hollow to reduce weight and unsprung weight.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA MONKEY125 All JB02/JB03/JB05 models (for front), HONDA DAX125 All JB04/JB06 models (for front), HONDA glom All JC61/JC75/JC92 models (for front), YAMAHA CYGNUS X-SR (SEA5J)BF91/93, (SED8J)BF92/94
Installed on: HONDA MSX125 (GROM)
Fits:HONDA MONKEY125 All JB02/JB03/JB05 models (for front), HONDA DAX125 All JB04/JB06 models (for front), HONDA glom All JC61/JC75/JC92 models (for front), YAMAHA CYGNUS X-SR (SEA5J)BF91/93, (SED8J)BF92/94
Installed on: HONDA Super Cub C125
Jul 4, 2024
I didn’t buy this axel for any weight saving I bought it for two primary reason 1) the axel bolt and nut are 17mm in size, going away from the stock 14 ands 17 mm varying sizing on the stock axel. Being hollow makes some weight saving but it hardly noticeable. 2)The most important factor for me was the black DLC coating makes the shaft removal and installation super easy. For the price everyone should get one.
View DetailFits:HONDA MONKEY125 All JB02/JB03/JB05 models (for front), HONDA DAX125 All JB04/JB06 models (for front), HONDA glom All JC61/JC75/JC92 models (for front), YAMAHA CYGNUS X-SR (SEA5J)BF91/93, (SED8J)BF92/94
Installed on: HONDA MSX125 (GROM)
Jun 27, 2024
KITACO Hollow Axle Shaft for the front wheel of the Grom
KITACO Hollow Axle Shaft to be used on the front wheel of the Honda Grom (or Monkey) as they have the same size.A good option for the weight saving althought the weight I measured it's not quite as low as stated... Otherwise it would get 5 stars. But overall, it's another quality product from KITACO.
View DetailFits:HONDA MONKEY125 All JB02/JB03/JB05 models (for front), HONDA DAX125 All JB04/JB06 models (for front), HONDA glom All JC61/JC75/JC92 models (for front), YAMAHA CYGNUS X-SR (SEA5J)BF91/93, (SED8J)BF92/94
Installed on: HONDA Monkey 125
Dec 9, 2023
Compared to genuine products, you can feel that the material and painting are better. The installation method is the same, but the size of the nut is different, so check it before installation.
View DetailFits:HONDA MONKEY125 All JB02/JB03/JB05 models (for front), HONDA DAX125 All JB04/JB06 models (for front), HONDA glom All JC61/JC75/JC92 models (for front), YAMAHA CYGNUS X-SR (SEA5J)BF91/93, (SED8J)BF92/94
Nov 21, 2023
가볍습니다. 확실히 순정에 비하면 가볍고 좋습니다. 순정에는 잘 맞습니다.ja65 기준 앞 바퀴에 설치하기엔 길이가 깁니다.비 추천 드립니다. 상담을 받으시고 추가 부속품을 사용하셔서 설치하심을 바랍니다.뒷 바퀴엔 설치가 가능합니다. 두개를 구매하실때는 충분히 고민 해보시길 바랍니다. 가격이 합리적입니다.설치시는 전문가의 도움을 받길 바랍니다. 너트쪽도 더 꾸미길 권장드립니다.
View DetailNew Custom Articles
