Be sure to work with the Center Stand in an upright position.
Also, as mentioned in the Instruction Manual, the Nut will rotate.
ESTRELLA 2007 is 14mm inside and 12mm outside. Wrench was used
- Instock
29.29 USD (4,242 JPY) 31.07 USD Save 6%
Webike Point: +42 pt
(0.28 USD)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
KAWASAKI
Open Fit Model Information Table
-
ESTRELLA
14 BJ250 [Frame No.]BJ250A-099001 to 103000
-
ESTRELLA
13 BJ250 [Frame No.]BJ250A-097001 or later
-
ESTRELLA
12 BJ250 [Frame No.]BJ250A-094001 or later
-
ESTRELLA
11 BJ250 [Frame No.]BJ250A-091001 to 094000
See all
KAWASAKI
Product detail
Material: Steel
Color: Chrome plated finish
For right side
Size: Φ10 (round bar part)
**On vehicles where the rear suspension has been replaced with an aftermarket rear suspension, the saddlebag support may contact the rear suspension..
Saddlebag support: Adequate outward overhang and sufficient longitudinal length to prevent contact with the rear suspension and rear axle.Minimizes abrasions to the saddlebags.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:KAWASAKI ESTRELLA 99 BJ250 [Frame No.]BJ250A-041001 or later, KAWASAKI ESTRELLA 97 bj250 [frame no.]bj250a-030001 or later, KAWASAKI ESTRELLA 98 BJ250 [Frame No.]BJ250A-035001 to 041000, KAWASAKI ESTRELLA 95 BJ250 [Frame No.]BJ250A-014001 to 030000, KAWASAKI ESTRELLA 94 BJ250 [Frame No.]BJ250A-008001 to 014000
Jul 30, 2022
Helpful?
Fits:KAWASAKI ESTRELLA 99 BJ250 [Frame No.]BJ250A-041001 or later, KAWASAKI ESTRELLA 97 bj250 [frame no.]bj250a-030001 or later, KAWASAKI ESTRELLA 98 BJ250 [Frame No.]BJ250A-035001 to 041000, KAWASAKI ESTRELLA 95 BJ250 [Frame No.]BJ250A-014001 to 030000, KAWASAKI ESTRELLA 94 BJ250 [Frame No.]BJ250A-008001 to 014000
Apr 7, 2016
I installed it in my wife Motorcycle,
Even women who are unfamiliar can be installed for as long as an hour.
I am in combination with Tegner's Back,
I think that it is good for prevention of involvement due to the clearance with Suspension.
Helpful?
Fits:KAWASAKI ESTRELLA 99 BJ250 [Frame No.]BJ250A-041001 or later, KAWASAKI ESTRELLA 97 bj250 [frame no.]bj250a-030001 or later, KAWASAKI ESTRELLA 98 BJ250 [Frame No.]BJ250A-035001 to 041000, KAWASAKI ESTRELLA 95 BJ250 [Frame No.]BJ250A-014001 to 030000, KAWASAKI ESTRELLA 94 BJ250 [Frame No.]BJ250A-008001 to 014000
Nov 15, 2015
I attached it to ESTRELLA's Right Side.
Since I also have Left SideBracket made by KIJIMA I tried to compare it in reverse, but DAYTONA made it longer in length and can hold Bag firmly!
I was wearing DEGNERNB - 1 made by KIJIMA, but the height was insufficient and the lower part of Bag touched and broken the Rear suspension, but this DAYTONA made few worries.
Another characteristic feature is the mounting hole for Bag fixing cord. KIJIMA made it easy to move with slippers even when tied up, but this is saved because it will not be shifted if it passes through a hole.
Both goodness of making does not change, I feel that it is very solid. Plating quality is also good.
Because it is practical importance Items, I feel like I should not ask for the goodness of Single Body, but the bone-braid is amazing. If it is about 2 - 3 mm thick already, it looks nice even without Bag, but if you look at it entirely, a casual feeling stands out.
It was transmitted to both rabbits and corners that it is a product made by thinking about the side of use well. I think that it is worth only the price. Recommendation!
(Although a polite Instruction Manual dedicated to model cars comes with Bolt, M10 before / Both M12 and Torque have misstatements later than M8. Those who purchase the service manual at hand. )
Helpful?
New Custom Articles
