WR250R / It depends on Top Bridge shape of X
Handlebar height will be raised by biting Aluminum spacer.
Since Nut of Reverse side also has Aluminum spacer, installation is a little troublesome.
BodyVolume There is a reasonable weight, but 3-position (After front center) There is a benefit of choosing.
- Sale
33.3 USD (4,992 JPY) 46.94 USD Save 29%
Webike Point: +50 pt
(0.33 USD)
Delivery Information
This item is discontinued.
Product detail
Old part number:ZE32-4245
For large diameter bar (28.6mm)
**Height adjustment is not available..
Two-piece handlebar clamp kit for mounting a large diameter bar (28.6mm) on a vehicle using a stock bar (22.2mm) with a rubber-mounted top clamp.
By adopting a exclusive bolt, the position can be adjusted in three ways: center (0), plus 4mm and minus 4mm from the center.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA WR250RX 07-17, YAMAHA WR250R 07-17
Mar 27, 2016
I got lost as YZOEMClamp - - -
Helpful?
Fits:YAMAHA WR250RX 07-17, YAMAHA WR250R 07-17
Feb 15, 2016
Although there is no height adjustment in the photographs and explanations, in fact the Spacer about 1 cm came under Clamp, so compatibility with MOTARDMedium of sx 3 Handlebar was not so good and it was necessary to handle Wire classes! Clamp It is perfect for itself! If it says strong, it is Aluminum spacer of about three kinds by height, depending on the height. For example, Limit's 5 mm which does not interfere with Stem Nut and 2 centimeters when you want to up 1 centimeter of the current attachment up to Large 3. If you can do something like 5 centimeters up, it seems to be a better item.
Helpful?
Fits:YAMAHA WR250RX 07-17, YAMAHA WR250R 07-17
Jun 3, 2015
Beautiful finish. It is good to shift the position slightly
Purchased to make Handlebar ZETA's SOLID Handlebar.
I like it because it looks good as well.
In my case I made it back, but I wonder if it was such a strange feeling?
I just felt that the position of the Handlebar was a little high.
With that it was hard to ride, it was not at all, I felt easy to use.
Regarding rigidity, I do not feel different from NORMAL.
Maybe because my usage is town riding and touring.
Helpful?
Fits:HONDA CR125R 00-07, HONDA CR250R 99-07, HONDA CRF250R 04-21, HONDA CRF250X 04-17, HONDA CRF450L 19-20
Nov 13, 2024
Works pretty well on the Kawasaki Z900RS
This part isn't officially compatible with the Kawasaki Z900RS but i saw someone on Instagram use it and really liked the design, so decided to risk it. The part looks great and fits the bike well although it drops the bar down pretty low. Coz of this, some adjustment will be needed to make sure the controls or the throttle cable tubing doesn't hit the tank when the bars are fully locked to the left or right.
View Detail
Helpful?
Fits:KAWASAKI KLX230 20-21 *The handlebar mounting position is 10mm higher than stock., KAWASAKI KLX230R 20-21 *The handlebar mounting position is 10mm higher than stock., YAMAHA WR250R 07-17, YAMAHA WR250RX 07-17
Dec 11, 2021
The texture is good but the height is 10? higher than OEM.
I got this from a friend of mine for my 2007 WR250X with the sx3 bar MX415, and although the Design and Aluminum quality of this Clamp is good, the height is 10? higher than OEM.
I don't recommend it for MOTARD because it made Handling quite sluggish.
If you want to raise the height of the Handlebar a little, it will fit.
Helpful?
New Custom Articles
