Since it was introduced in a magazine, it continues to purchase and use for a long time, but it has been a long time, but there is no sense of security if there is or not.
When connecting Main key to On, it interrupts and connects to the line to be energized and the line connected to Injection Body and connect it. Once you set it to full Tan, run to Limit, just set up and set up.
R1 (07) In the case of 18Liter it is set, but I understand how much it runs with 1Liter consumption and since it becomes 10cc unit when 10Liter is cleared, the remaining amount is also easy to understand and it is useful.
Once overconfidence (It seems to be an error) There are things that have become Gas missing too much, but after that I am trying to refuel with a margin.
Even if I change the model, I can use it again because I set it, I think that I was glad I could buy it.
93.09 USD (14,180 JPY)
Delivery Information
If manufacturer have in stock, ships around 19th Feb. 2025
Product detail
Rated Voltage: DC12V
Display Unit: 0.1L (100cc) unit / 0.01L (10cc) unit *Automatic switching depending on usage
Outline size: W57 x H40 x D12.3mm
**This product is for 12V fuel injected vehicles only.Optional parts are separately required for installation on carburetor models.
*Installation must be done correctly according to the instruction manual.Installation in a manner other than that described in the instruction manual may result in fire or accident. Also, refer to the service manual issued by the vehicle manufacturer..
・Two display modes (Trip A and B) accurately digitally display the amount of gasoline used by your Fi vehicle.
In both A and B mode, from 0.00L to 9.99L is displayed in units of 0.01L, and above 10L is displayed in units of 0.1L automatically.
You can reset the usage mode at any time and as many times as you want!
When used with a trip meter, it is very useful for measuring average, sectional and instantaneous fuel consumption.
・Equipped with gasoline level warning (flash timing) function!
When the value in the A mode reaches the [optionally registered value], the indications of both A and B modes blink at intervals of about 2 seconds.
Example: If the vehicle has a tank capacity of 30 liters and the flash timing is set to 25.0, the display will flash when the remaining gasoline capacity is 5 liters or less.
*You can overwrite the flash timing as many times as you like.
・Perfect for racing use!
Dual mode allows you to see how much gasoline you're using!
・Easy setup and easy operation
You fill up the tank with gasoline and drive, and when you finish memorizing the fuel consumption, you fill up the tank again and
Simple setting by inputting the refueling amount and the flash timing setting value.
Once you have set it up, all you have to do is press the reset button when you fill up the tank or measure the fuel consumption.
・Easy installation
Easy installation with only 3 wires to get the positive, negative and injector signals from the vehicle.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Aug 4, 2015
New Custom Articles
