Color: Black [Set components] ・Banjo Adapter x 1 ・Banjo Bolt x 1 ・Aluminum Washer x 2
*Images contain color: Silver is also included. *The banjo bolt on the master side is not included. *The thickness of the banjo part is 8.0mm.Use a shorter type of banjo bolt.
Replacement of brake hoses associated with custom master cylinders and calipers.Many of the stock vehicles nowadays come with stainless steel hoses.However, some radial masters such as Brembo's radial masters have the banjo mounting point facing downward.Often the angle doesn't match and the hose has to be replaced.We made an adapter to convert this 90 degrees. When upgrading the master cylinder or caliper to a high performance brake system such as Brembo, the banjo bolts are often installed facing downwards and the angle and length are different, so the pre-installed stainless steel brake hose cannot be installed on many vehicles. By installing this "Brake Banjo Adapter" which converts the master cylinder outlet 90 degrees, you can use the brake hose as it is, and you don't need to buy a new stainless steel brake hose. This product can be used not only for Harley but also for Ducati and Japanese vehicles.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
When converting a Scooter to a Pipe Handlebar, the brake hose interfered with the cowl and bent at a great angle, so I used this hose. As expected, the handling was effortless. It's a good price, but it's a lot cheaper than getting the angled Banjo Hose, so I'm happy.View Detail
Used to change OEM Horizontal TypeBrake master to brembo RadialPump. It is convenient because the banjo bolt can be installed in the same mounting position as the OEM brake hose.View Detail
If you change from OEMMASTER to Horizontal Type separate body or Radial, you can connect without changing Hose and it will be saved. I changed it to Semi-radial and wanted to use OEMHose as it was so I bought it. Since the material is Aluminum, I wanted it if it had a durable Stainless Steel Type. Also, Banjo bolt on the MASTER side is not attached and because the Banjo part is 8 mm thick OEMBanjo (Thickness 10 mm) Can not use Thin Type BanjoView Detail
When attaching Pressure switch to Rear brake, it was necessary to miss Hose and there was no other similar purchase. Function and quality are satisfactory, but that should be that. It is a good price for me.View Detail
I bought it because I want to use OEMHose for Brembo radial master. I think that it is good to increase the installation width if there are several kinds of Length. However, since such Parts are not other, I think that it is worthwhile parts.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!