There is a rear box, but I put small items that are troublesome to get down and take out every time in this box.
It has a strong Neodymium magnet and can be attached to iron tanks or resin tanks with a suction cup.
A similar product is DEGNER's, but that one is Quantity:Pair (for Left and Right) This is a three-way fastening, so it won't gap or come off.
However, the Suction Cup is still a consumable item and needs to be replaced as it becomes less slippery.
All you need is a hundred Suction Cups. This is Exactly.
https://jp.daisonet.com/collections/remodeling0206/products/4549131632644
Suction Cup replacement for DEGNERTank Bag was a challenge, but this one was replaced in no time!
Just take the old one off and put it on.
There is no hang. The only thing I would say is that the Hook is easy to break if it is left as it is, so it is easier to insert and remove if you put a brim on it.
It would probably look better if I cut off the end of the Hook, but I didn't want to bother with that, so I left it as it was.
The size is just right, so I'm doing just fine, but the Zipper String and Suction Cup are consumables, so I'm not sure if I need to replace them after using them.
30.03 USD (4,694 JPY)
Delivery Information
This item is discontinued.
Product detail
Color: K (Black)
**This product has been designed to be durable, but may be damaged if subjected to excessive stress or used improperly.
*Cannot be installed in bikes where setting belts cannot be installed.
*If the setting belt becomes frayed or torn, discontinue use immediately.
*The hooks of the setting belt must be connected securely.Insufficient connection may cause the bag to fall out.
*This product is designed for on-road driving and is not suitable for off-road driving.
*If not properly secured, the product may become unstable and fall off. Please do not take risks such as forcing the bike into corners (roads) or driving above the legal speed limit.
*If not properly secured, the bike will be unstable and unbalanced. Please be careful to avoid cross winds at high speeds and wind pressure when exiting tunnels.
*Vibration may cause scratches on the contact area between the bag or belt and the bike, so please put a commercially available protector sheet on the contact area.
*Do not check the map or operate the navigation system while driving.
*The rain cover is waterproof, but it does not prevent water from entering through the bottom of the bag.For long runs in the rain, please put your bag inside a stuff sack or plastic bag.
*Navigation ventilation is reduced when the rain cover is installed.Do not use the navigation system in the rain as it may overheat.
*When the navigation system is used for a long time, the surface and back of the navigation system may be scratched by vibration or operation.
*Please be careful not to overpack the bag, as it may cause damage to the bag or interfere with riding.
*Be sure to check that there are no obstacles to riding, and be sure to fix any buckles that are loose or unbuckled before using the belt.If any abnormality occurs during operation, stop using the product immediately.
*Be sure to check that the suction cups do not interfere with driving before driving, and if they are floating, be sure to fix them before use.If any abnormality occurs during operation, stop using the product immediately.
*This product is made of polyurethane, which will gradually deteriorate in about 3-5 years due to the characteristics of the material.
*The suction cups are made of silicone, so if they are left on the tank for a long period of time, the paint on the tank may come off.Always remove the suction cup from the tank and store it after use.
■Warning■
*Failure to follow these precautions may cause accidents result in death or injury..
[Material] 840D nylon, PVC
[Details, Accessories] Setting belt / Adjustment pad / Rain cover
<
Three-point suction cup type for secure fixation to both metal and plastic tanks.The included height adjustment pad securely holds even a thin navigation system in place for easy viewing.