*Stomp Grip adhesive needs 24 hours to stabilize its adhesive strength.Full adhesion requires 72 hours.If you use the product before it is fully bonded, it may peel off or shift. *Please pay special attention to the use of stomp grips that are attached to the frame surface. *When driving a vehicle equipped with stomp grips, please wear clothing that does not allow your bare skin to come into direct contact with the stomp grips.If you drive with your bare skin in direct contact with the product, you may suffer from abrasions and other injuries. The adhesive used in Stomp Grip is very strong.If you remove the stomp grips forcibly, the paint may come off with them.To remove the Stomp Grip, heat it up with a heat gun or the like to reduce its adhesive strength, and then remove it. (It depends on the paint condition of the vehicle, but older vehicles need special attention) *We do not accept returns or exchanges after the package has been opened. *Because of the shared stock system with the store, there is the case that it is out of stock by the purchase timing regardless of the stock display.If the item is not in stock, we will order it for you. *Please make sure to check the year of your vehicle before ordering.
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue. From the street to the circuit, it is highly supported in various situations. Originally developed elastomer material, strong 3M adhesive is used for the adhesive. The pad keeps its original gripping power without shifting even in hard riding scenes. MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world. It is very popular in the circuit and the street in Japan. Stomp Grip users are increasing all over the world.
[stomping on stomp grips] 1. Clean the surface to be applied. (When using clear, please remove dirt and water stains with compound before starting work) 2. Degrease the surface to be applied. 3. Perform positioning. 4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting. (If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength. Full adhesion requires 72 hours. If you use the product before it is fully bonded, it may peel off or shift.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!