It is being used as a top case of CRF1000L.
The capacity is quite large type in 52L and Top case, but it is not as heavy as it looks, and the storage capacity is outstanding, Helmet can stand and Quantity:2pc. It can hold a helmet and a jacket. However, if you have a helmet that sticks out like an off-helmet, 1pc. is the limit because the lid won't close unless you turn it sideways.
The case itself is Plastic but quite sturdy, and the top panel is Material:There is a sense of luxury in aluminum, and even if Side case is combined with WreckerOutBack, there is no sense of discomfort in appearance.
Although you need to prepare a special base plate to attach it to the car body, you can attach and detach it with a single motion and it is quite easy to use. That's not to say it's prone to falling off, and it doesn't look like it's going to rattle even if you're driving on a bouncy road.
The waterproofing is fine, and as long as the lid is closed tightly, it doesn't seem to get flooded by a little rain. I don't know because I haven't ridden in real rain yet, but when I washed the mud stains on the exterior with Shower, it didn't soak.
SizeThe price is reasonable, but I feel that it is worth it.
I would highly recommend it to anyone who is having trouble choosing a top case for their AdventureMotorcycle.
360.35 USD (52,483 JPY) 405.09 USD Save 11%
Delivery Information
-
Please select product form first.
FITMENT
-
VTR1000FVTR1000F FIRESTORM
97-04 [M3 Base (90090) + Monorack Fitting 251F (94010)].
-
VFR800XCROSSRUNNER 125
15 Domestic [M7 Base (91332) + Monorack Fitting SR1139 (94515)].
-
Integra700
12-13 [M7 base (91332) + fitting for monorack 1109FZ (79876)] *Not available for Integra 750 (14-)
-
Integra700
12-13 [M5 Base (90140) + Monorack Fitting 1109FZ (79876)] *Not available for Integra 750 (14-)
See all
HONDA
-
TDM850
96-01 [M3 base (90090) + fitting 336F (94027) for monorack].
-
MT-10
16-21 16.5- European specification [M7 base (91332)].
-
XJ600
91-03 Diversion European specification [M3 Base (90090) + Monorack Fitting 325F (91691)].
-
TDM900
02-14 [m3 base (90090)]]
See all
YAMAHA
-
BANDIT1200
00-05 [M3 base (90090) + fitting for monorack 522F (95265)
-
BANDIT1200
00-05 [M3 base (90090) + fitting for monorack 522F (95265)
-
BANDIT1250
07-11 GSF1250[M7 base (91332) + fitting for monorack 539FZ (94033)
-
BANDIT1250
07-11 GSF1250[M5 base (90140) + fitting for monorack 539FZ (94033)].
See all
SUZUKI
-
ER-4n
11-13 [M7 base (91332) + fitting for monorack 449FZ (94052)
-
ER-4n
11-13 [M5 base (90140) + fitting for monorack 449FZ (94052)
-
ER-6f
09-11 European specifications [M7 Base (91332) + Monorack Fitting 449FZ (94052)
-
ER-6f
09-11 European specifications [M5 Base (90140) + Monorack Fitting 449FZ (94052)
See all
KAWASAKI
-
MONSTER696
08-14 [M5 Base (90140) + Monorack Fitting 780FZ (95268)
-
MONSTER1100EVO
11-12 [M7 base (91332) + monorack fitting 780FZ (95268)].
-
MONSTER796
08-14 [M5 Base (90140) + Monorack Fitting 780FZ (95268)
-
MONSTER696
08-14 [M7 Base (91332) + Monorack Fitting 780FZ (95268)
See all
DUCATI
-
F650GS Dakar
00-03 00/8-03[M3 base (90090) + fitting 639F (40130) for monorack].
-
F650 GS
00-03 00/8-03[M3 base (90090) + fitting 639F (40130) for monorack].
-
K1200RS
00-04 [M3 Base (90090) + Monorack Fitting 680F (94814)] * Fits only to vehicles equipped with stock rear handle (U-shape) Not for vehicles equipped with stock luggage rack.
-
K1200GT
03-04 [M3 Base (90090) + Monorack Fitting 680F (94814)] * Fits only to vehicles equipped with stock rear handle (U-shape) Not for vehicles equipped with stock luggage rack.
See all
BMW
-
1050 ADVENTURE
15-16 [M7 Base (91332) + Tubular Pannier Holder SR7705 (93143)
-
1050 ADVENTURE
15-16 [M5 Base (90140) + Tubular Pannier Holder SR7705 (93143)
-
1190 ADVENTURE
13-15 R[M7 Base (91332) + Tubular Pannier Holder SR7705 (93143)].
-
1190 ADVENTURE
13-15 R[M5 Base (90140) + Tubular Pannier Holder SR7705 (93143)].
See all
KTM
-
SPRINT ST
05-11 1050 [M7 Base (91332) + Monorack Fitting 726FZ (68189)] *Not for Sprint GT 1050 (10-)
-
SPRINT ST
05-11 1050 [M5 Base (90140) + Monorack Fitting 726FZ (68189)] *Not for Sprint GT 1050 (10-)
-
STREET TRIPLE
07-12 675 [M7 Base (91332) + Monorack Fitting 727FZ (68187)].
-
STREET TRIPLE
07-12 675 [M5 Base (90140) + Monorack Fitting 727FZ (68187)].
-
SHIVER 750
10-15 ABS [M7 Base (91332)].
-
SHIVER 750
10-15 ABS [M5 Base (90140)].
-
SHIVER 750
10-15 [M7 base (91332)]
-
SHIVER 750
10-15 [M5 Base (90140)]]
See all
APRILIA
-
BREVA V750
03-12 [M3 base (90090) + fitting 703F (94527) for monorack].
Product detail
-
color silver
-
Maximum capacity (L) 52
-
Minimum capacity (L) 52
-
Maximum loading weight (Kg) 10
[Capacity] 52L
[Maximum loading weight] 10kg *DAYTONA recommends 3kg or less for maneuverability
[Main unit weight] Approx. 5.2 kg
[Size] Depth 460 x Width 600 x Height 315mm
[Material] Body: Made of PP, top cover surface: Aluminum
**Do not load more than the loading limit of the fittings.
*For maneuverability, Daytona recommends less than 3kg.
*This product cannot be mounted on a base with contacts.
*Helmets may not be able to be stored depending on their size.
*The aluminum part of the top cover is processed from the board, so there may be some processing marks.
*The surface of unpainted products is rough because they have not been treated.
*Please select the same type of key as you currently use for your key set.For repair key sets, please refer to "GIVI Case Related Repair Parts".
*This product is designed to be waterproof, but is not completely waterproof.Especially, when TRK33 / TRK46 with deteriorated packing is used as a side case, there is a high possibility of water getting into the inside.Please take sufficient waterproof measures for the case contents.
*Item numbers, prices, and specifications are subject to change without notice.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
.
TREKKER series debut.Robust and intrepid design with aluminum parts.
 |
 | ||||||||
 |  |  |  | |||||
| Insert the key into the key cylinder. Insert the key into the key cylinder. | Turn the key to the right (3 o'clock). | Push the red oval button at the top of the key cylinder. | The flap that says "PRESS" will float. | |||||
 | ||||||||
 | |  | ||||||
| Please make sure that the key is inserted and turned to the right (3 o'clock). | With the key turned to the right (3 o'clock), press down on the upper side (marked with *) of the triangle marked "PRESS". Please lock it. | When the lid is locked, turn the key to the left (12 o'clock) to lock the buttons.When the key can be removed and all buttons are locked, the lid cannot be opened or closed.After this, be sure to lift the lid slightly to make sure that it is securely locked. | ||||||
 | ||||||||
| With the top lid open, align the case with the base, lift the base with your left hand and press down on the bottom of the case from above with your right hand to lock it in place. In particular, for small vehicles, the rear suspension may be soft and it may be difficult to lock it securely just by pressing from the top, so be sure to install it in this way. |  |  | ||||||
When the button is pressed, it retracts about 6mm from the stock locking state.
MODEL PAGE LINKS
- HORNET250 (CB250F)
- CB400X
- CB500 Four
- CBF500
- CB500X (500X)
- CBF600
- CBF600S
- CBR600F
- HORNET600 (CB600F, 599)
- Hornet 600S
- CB650F
- CBR650F
- CTX700
- CTX700N
- NC700S
- NC700X
- INTEGRA
- CB750
- NC750S
- NC750X
- VFR750F Interceptor
- NC750 Integra
- VFR800 Interceptor
- VFR800F
- VFR800X CROSS RUNNER
- HORNET900 (CB900F, 919)
- CB1000R
- CBF1000F
- CRF1000L Africa Twin
- VTR1000F Firestorm (SuperHawk)
- CBR1100XX Super Blackbird
- VFR1200F
- CB1300SF (Super Four)
- CB1300SB (Super Bol D'or, CB1300S)
- Inazuma400 (GSX400 Inazuma)
- GS500
- GSX600
- BANDIT600 (GSF600)
- Bandit600S (GSF600S)
- GSX650F
- SV650
- SV650S
- BANDIT650 (GSF650)
- Bandit 650S(GSF650S)
- GSR750
- GSX750F
- INAZUMA750 (GSX750)
- GSX-S1000
- GSX-S1000F
- SV1000
- SV1000S
- GSF1200 (Bandit)
- GSF1200S (Bandit)
- INAZUMA1200 (GSX1200)
- Bandit1200 (GSF1200)
- Bandit1200S (GSF1200S)
- Bandit1250 (GSF1250)
- Bandit1250F (GSX1250F)
- Bandit1250S (GSF1250S)
- GSX1300R HAYABUSA
- GSX1400
- Z250 (2013-)
- NINJA250 (EX250)
- Z300
- ER-4n
- ZZR400
- NINJA400 (2014-)
- NINJA400R (ER-4f) (-2013)
- ZZR600 (Ninja600, ZX-6E)
- ER-6f (Ninja650)
- ER-6n
- VERSYS650
- Z750 (Liquid cooled)
- ZR-7/S
- Z800
- Z1000 (Water-cooled)
- Ninja1000 (Z1000SX)
- ZRX1100
- ZRX1100II
- ZZR1100 (ZX-11)
- ZRX1200R
- ZRX1200S
- ZRX1200 DAEG
- ZZR1200
- ZZR1400 (ZX-14 Ninja)
- Ninja ZX-14R (ZZR1400)
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:SUZUKI GSX750F 03-06 [m7 base (91332)]], HONDA CB500X , YAMAHA FAZER8 10-15 (with front cowl) [M7 base (91332) + fitting for monorack 366FZ (74369), YAMAHA FAZER8 10-15 (with front cowl) [M5 base (90140) + fitting for monorack 366FZ (74369), YAMAHA MT-09 To Racer 15-16 [M7 Base (91332) + Special Rack SR2122 (92338)] *Not tested for installation on 17 models (with assist & slipper clutch as standard)
Jun 20, 2021
Fits:SUZUKI GSX750F 03-06 [m7 base (91332)]], HONDA CB500X , YAMAHA FAZER8 10-15 (with front cowl) [M7 base (91332) + fitting for monorack 366FZ (74369), YAMAHA FAZER8 10-15 (with front cowl) [M5 base (90140) + fitting for monorack 366FZ (74369), YAMAHA MT-09 To Racer 15-16 [M7 Base (91332) + Special Rack SR2122 (92338)] *Not tested for installation on 17 models (with assist & slipper clutch as standard)
Nov 4, 2020
This Large size is very convenient.
I was a little concerned about the strength of each part because it's resin, but it's pretty solid and I haven't had any problems with it.
However, I don't have anything that heavy in my bag, so I'm not sure if I'll be able to attach it to the Base or not.
By the way, OffHelmet is only 1pc. in shape.
Fits:SUZUKI GSX750F 03-06 [m7 base (91332)]], HONDA CB500X , YAMAHA FAZER8 10-15 (with front cowl) [M7 base (91332) + fitting for monorack 366FZ (74369), YAMAHA FAZER8 10-15 (with front cowl) [M5 base (90140) + fitting for monorack 366FZ (74369), YAMAHA MT-09 To Racer 15-16 [M7 Base (91332) + Special Rack SR2122 (92338)] *Not tested for installation on 17 models (with assist & slipper clutch as standard)
Nov 23, 2017
If you install it more than you thought, it is Large, but it's convenient as anything can be thrown in.
If Helmet is also empty, it is affordable Quantity : 2pc. Set storage (us Jet only so JetQuantity : 2pc. Set)
There is no running with putting heavy objects, but there is nothing to wander in particular. (Actual feeling only)
Well, well, it's expensive w
Fits:SUZUKI GSX750F 03-06 [m7 base (91332)]], HONDA CB500X , YAMAHA FAZER8 10-15 (with front cowl) [M7 base (91332) + fitting for monorack 366FZ (74369), YAMAHA FAZER8 10-15 (with front cowl) [M5 base (90140) + fitting for monorack 366FZ (74369), YAMAHA MT-09 To Racer 15-16 [M7 Base (91332) + Special Rack SR2122 (92338)] *Not tested for installation on 17 models (with assist & slipper clutch as standard)
Oct 17, 2017
Even if it is Large, there is good
At first I thought that Large was too good, but it is very convenient to use.
Since the direction of the key is fixed, it may be more convenient if it is designed to get stuck upside down.
Fits:SUZUKI GSX750F 03-06 [m7 base (91332)]], HONDA CB500X , YAMAHA FAZER8 10-15 (with front cowl) [M7 base (91332) + fitting for monorack 366FZ (74369), YAMAHA FAZER8 10-15 (with front cowl) [M5 base (90140) + fitting for monorack 366FZ (74369), YAMAHA MT-09 To Racer 15-16 [M7 Base (91332) + Special Rack SR2122 (92338)] *Not tested for installation on 17 models (with assist & slipper clutch as standard)
Aug 9, 2016
It took less than 2 months to arrive the base rack, so it is still unused for long distance Two, but capacity is enough even at accommodation tournament !!
Helmet is Quantity : 2pc. Set Fit in room.
It may be too large for normal two.
New Custom Articles
