I used it for tw225.
The bar in the middle is a cool handlebar.
Position is just right, and this is a usable handlebar.
For earthy VINTAGE.
- Sale
- Instock
39.92 USD (6,067 JPY) 41.76 USD Save 4%
Delivery Information
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
CB1100
-12 SC65 (except for the up-handed model ABS vehicle)
-
NC700X
12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
-
FTR223
(with side numbers) *Processing of switch holes required
-
FTR223
(without side numbers) *Processing of switch holes required
See all
HONDA
-
TW200E
00- (Disc Brake Car) *Processing of switch hole is required
-
TW200E
-99 (drum brakes)
-
TW200
-99 (drum brakes)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER Big Boy
-08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
-
GRASS TRACKER
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER
-08 (Carburetor)*Side caps can be used as stock.
See all
SUZUKI
-
W400
*Required Switch Hole Drilled
-
250TR
-06 (Carburetor) *Processing of switch hole is required
-
Universal
Product detail
Handlebar color: Chrome plated
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 95mm
Full width: 785mm
Effective width of holder installation part: 135mm
Pullback size: 160mm
Insertion angle: 24 degrees
Forward leaning angle: 50 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.