2012년 CB1100 의 순정 대체품으로 허리케인 유로피언 타입3 핸들바를 장착하였습니다.개인적인 생각으로 혼다 순정품보다 더 퀄리티가 좋다고 생각했습니다. 다만, 스위치의 구멍의 위치를 선정하는 것이 조금 어려웠습니다.가장 안심이 되었던 것은 케이블의 교환 없이 설치가 가능한 점입니다. 교환 후에 포지션도 더 편하고 강력하게 추천합니다.
View Detail25.95 USD (3,939 JPY) 26.36 USD Save 2%
Delivery Information
No Information acquired.
FITMENT
-
MONKEY
84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
-
MONKEY
09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
-
NC700X
12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
-
FTR223
(with side numbers) *Processing of switch holes required
See all
HONDA
-
TW200E
00- (Disc Brake Car) *Processing of switch hole is required
-
TW200E
-99 (drum brakes)
-
TW200
-99 (drum brakes)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Side caps can be used as stock.
-
GRASS TRACKER
09-12 09-12(FI cars)*Side caps can be used with the stock ones.
See all
SUZUKI
-
W400
*Required Switch Hole Drilled
-
250TR
-06 *Processing of switch holes required
-
Universal
Product detail
Handlebar color: Chrome plated
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 145mm
Full width: 740mm
Effective width of holder installation part: 130mm
Pullback size: 175mm
Insertion angle: 25 degrees
Forward leaning angle: 70 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.