The specs have been changed from the OEM height to a slightly lower, slightly narrower version for long touring. The overall width has been narrowed to reduce vibration and increase comfort. It's also easier to handle, a win-win!
View Detail- Instock
23.18 USD (3,539 JPY) 23.58 USD Save 2%
Delivery Information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
MONKEY
09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
-
MONKEY
84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
-
APE 50
08-12 (FI Drum Brake) *Processing of switch holes is required
-
HORNET250
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
See all
HONDA
-
XJR1300
07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
-
XJR400R
01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
-
XJR1300
00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
See all
YAMAHA
-
ST250
-07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
-
ST250 E Type
-07 NJ4AA *Processing of switch holes required|* Normal side caps can be used.
-
GSR400
-12 *Ask to drill switch holes|* Normal side caps can be used.
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
See all
SUZUKI
-
W800
*Required Switch Hole Drilled
-
ZRX1100
*Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
-
250TR
-06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder.
-
W400
*Required Switch Hole Drilled
See all
KAWASAKI
-
Universal
Product detail
Handlebar color: Black
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 75mm
Full width: 690mm
Effective width of holder installation part: 130mm
Pullback size: 145mm
Insertion angle: 30 degrees
Forward leaning angle: 70 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Double anti-corrosion treatment by acrylic coating over black chrome plating.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.