Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the grip goes, and not making it an easy to remove sticker meant I took about 20 minutes soaking and rubbing the area to remove it.Also the standard bars have a location hole for the left and right switch cluster to stop them rotating. These bars do not so you either drill a hole and hope to get it in the correct position, or remove the locating pin from the switch cluster.
View Detail
- Sale
- Instock
19.44 USD (2,925 JPY) 25.64 USD Save 24%
Webike Point: +29 pt
(0.19 USD)
Delivery Information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
CB1300 SF
03-09 *Processing of switch holes required|* Required side cap (for 18mm ID)
-
VTR250
09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm)
-
APE 100
-12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes
-
NC700S
12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
See all
HONDA
YAMAHA
-
XJR1300
07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
-
XJR400R
01-07 (RH02J)*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
-
XJR1300
00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
See all
YAMAHA
SUZUKI
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER Big Boy
-08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
GSX400
05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
See all
SUZUKI
KAWASAKI
-
ESTRELLARSCustom
96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
-
ZEPHYR1100
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZRX400
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZRX400II
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
See all
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
Product detail
Handlebar color: Black
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 80mm
Full width: 730mm
Effective width of holder installation part: 130mm
Pullback size: 110mm
Insertion angle: 21 degrees
Forward leaning angle: 85 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Double anti-corrosion treatment by acrylic coating over black chrome plating.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable., HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter), HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 vtec III*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
Fits:HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable., HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter), HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 vtec III*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
Mar 3, 2022
I replaced Handlebar to immeChain.
The height of the handlebar is now much lower.
It's so much easier to ride.
Helpful?
Fits:HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable., HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter), HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 vtec III*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
Feb 23, 2021
这个车把比原厂的车把窄了不少，另外，原厂的那个车把真得好重，这个则要轻很多。然后这个车把他不像原厂的车把有往回弯的那样，所以整个骑行的姿势会往前稍稍前倾一些，而原来的姿势是直直的坐着，相比较而言我还是更喜欢这个姿势，腰部会更舒服一些。车把短了有一些别的问题，national cycle的这个挡风适配不如原来的车把好了。----------------------------------------------The handlebar is narrower than a lot of the original handlebar, in addition, that the original handlebar really well heavy, this will have a lot of light. Then the handlebar He does not have that back the original handlebar bend, the entire riding posture will move forward slightly forward for some, but the original posture is sitting straight, comparatively speaking I prefer this position, the waist will be more comfortable. There are some other short handlebar problems, national cycle of the wind adapted better to the original handlebar good.Powered by Google Translator
View DetailHelpful?
Fits:HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable., HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter), HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 vtec III*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
Jun 1, 2019
Качественный, красивый руль. Установил его вместо оригинального. Очень удобный для меня по сравнению с оригинальным. Удобнее посадка, легче и комфортней управлять байком. Минусы немного шире оригинала, тяжелее. Очень понравился руль. Рекомендую.Quality, beautiful steering wheel. Installed it instead of the original. Very convenient for me compared to the original. Comfortable fit, easier and more comfortable to drive a bike. Cons a little wider than the original, heavier. Loved the steering wheel. Recommend.translated by Google Translator
View DetailHelpful?
Fits:HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable., HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter), HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 vtec III*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
Dec 13, 2018
I'm putting it on my SR
I was looking for something a little lower and wider than NORMAL and decided on these
I was a little concerned about the width, so I cut the ends by 1cm on each end and rode it
I've been using it for a long time and I love the texture
Helpful?
New Custom Articles
