[How is it used?
I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!
Was the one you received as per Image?
While slightly lower than OEM, nothing wrong with that!
Was the installation difficult?
Although the Handlebar itself is not difficult to install, I wasn't sure whether or not to drill a hole in the Handlebar to fix the Switch, and as a result, I shaved off the protrusion around the Switch to install it!
How was your experience with it?
I'm uncomfortably Large satisfied!
[Included Parts:were they on?
It wasn't attached.
- Sale
- Instock
17.28 USD (2,600 JPY) 23.42 USD Save 26%
Webike Point: +26 pt
(0.17 USD)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
APE 50
08-12 (FI Drum Brakes) *Processing of switch holes is required
-
MONKEY
09-12 (AB27-1900001-)(FI Vehicle)*Requires Top Bridge H30 Holder, or MONKEY Handle Holder|*Requires switch hole drilling
-
APE 100
-12 (Drum Brake) *APE100(09-) only, requires drilling of the switch.
-
APE 50
-07|08 (Carburetor) *Only APE100(09-), Switch hole drilling required.
See all
HONDA
YAMAHA
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
-
XJR400R
01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.
-
TW200E
-99 (drum brakes)
-
TW200E
00- (Disc Brake Car) *Processing of switch hole is required
See all
YAMAHA
SUZUKI
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER
09-12 43355(FI cars)*Side caps can be used for stock.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
ST250 E Type
-07 (NJ4AA)(Carburetor) *Need to drill switch hole|*You can use normal side cap. |*You need to change the direction of the brake banjo.
See all
SUZUKI
KAWASAKI
-
BALIUS
91-94 *Processing of the switch hole is required|*Required side cap (for inner diameter φ18mm)|*Please raise the bar end.
-
BALIUS2
*Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
-
ZEPHYR400
*Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
-
ZEPHYRX
*Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
See all
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
Product detail
[Handlebar color] Chrome plating
[Handlebar specification]
・Outer diameter Φ22.2mm / inner diameter Φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 35mm
Full width: 670mm
Effective width of holder installation part: 120mm
Pullback size: 130mm
Insertion angle: 20 degrees
Forward leaning angle: 45 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward., YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E -99 (drum brakes), YAMAHA TW200 -99 (drum brakes)
Jul 25, 2021
Helpful?
Fits:YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward., YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E -99 (drum brakes), YAMAHA TW200 -99 (drum brakes)
Installed on: HONDA CB1100EX
Feb 6, 2019
Excellent low profile bars if you're looking for low rise. Beautiful finishing and good quality, solid handling. I truly like the look
View Detail
Helpful?
Fits:YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward., YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E -99 (drum brakes), YAMAHA TW200 -99 (drum brakes)
Mar 6, 2016
I used it to lower the CB 223S Handlebar
We also need to exchange Handlebar weight.
For details click here → "Our CB 223S" http : / / cb223s. web. fc2. com / Please refer to.
Helpful?
Fits:YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward., YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E -99 (drum brakes), YAMAHA TW200 -99 (drum brakes)
Nov 6, 2015
These are excellent quality handle bars. The handle bars feel very sturdy and well-made. The quality of the chrome on the handle bars is excellent as well; there are no visible blemishes, marks, or scratches on the chrome whatsoever. Excellent value for money overall, and much cheaper and much better constructed when compared to buying handlebars from the UK or the USA.
View DetailHelpful?
Fits:YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward., YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E -99 (drum brakes), YAMAHA TW200 -99 (drum brakes)
May 14, 2012
Although the Forward Conti of the same HURRICANE was used before, since it was a Makeover, it changed into the Flat-continental 4 type.In
height, although it seldom changes to a Forward Conti, since Flat-continental 4 type is close to a Flat, it is necessary to lengthen with an arm near at hand, and becomes with some [ nature and ] anteversion.
The Brake and Clutch side has a Tank and in addition last-minute Hoses, and the Position change for the upper and lower sides of Levers is in the state which is not made at all.
It is as having planned a Position and appearance and satisfied anyway.
Helpful?
New Custom Articles
