I installed it for NINJA's Pipe Handlebar.
I did not like regulations that are too easy with Up, so I decided to do it here.. Because it is moderate diaphragm and height, Position can do both well from town riding to Winding. Even if you are on a long distance you do not get tired, a height of 166 cm It is a dish of satisfaction for a bad old man.
As expected it is satisfying from price, quality, shape, such as HURRICANE. I can expect strength as it is ChromeSteel.
- Instock
23.7 USD (3,680 JPY)
Webike Point: +37 pt
(0.23 USD)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
HORNET250
*Need to drill switch hole
-
MONKEY
09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
-
APE 50
-07|08 (Carburetor)*APE100 (09-) only
-
APE 50
08-12 (FI Drum Brake) *Processing of switch holes is required
See all
HONDA
YAMAHA
-
XJR1300
07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
-
XJR400R
01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
-
XJR1300
00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
See all
YAMAHA
SUZUKI
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER
09-12 09-12(FI cars)*Side caps can be used with the stock ones.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
GSX400
05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
See all
SUZUKI
KAWASAKI
-
BALIUS
91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter)
-
BALIUS2
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZEPHYR750 RS
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZEPHYRX
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
See all
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
Product detail
Handlebar color: Chrome plated
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 50mm
Full width: 675mm
Effective width of holder installation part: 135mm
Pullback size: 135mm
Insertion angle: 32 degrees
Forward leaning angle: 105 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
![[Webike Monitor] SRX-6 under <br>Restore was purchased from a price being cheap in this Handle for the time being for Up-Handle-izing.
Compared with the Separate handle of a NORMAL, it became Grip 1 duty this side and a top.
It is touch to carry out on b](https://global-fs.webike-cdn.net/photo/article/50/1340196510050M.jpg)
Fits:HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm), HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Apr 22, 2017
GPZ900RNINJA to the classic Custom
Helpful?
Fits:HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm), HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Apr 5, 2016
I replaced it from Separate Handle.
I incorporated it with HURRICANE Under bracket and Handlebar Holder.
It was somewhat necessary to adjust the positioning of Front fork.
Cable relation also attached without problem.
It seems that long distance Touring will be easier as well.
Helpful?
Fits:HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm), HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Dec 3, 2015
I installed it in VIRAGO 250.
I introduced VIRAGO to Custom for Bobber.
It was the correct answer with the lowest 1 type.
Like that, it was coolly decided!
However, since it interferes with Tank when attached normally, Handlebar Post is inverted and installed.
Because the quality of Plating seems to be strong, is it a place like the well-known Manufacturer?.
Helpful?
Fits:HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm), HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Nov 19, 2015
Since it can be delivered free shipping on over 3,000 yen, I do not have to go to the PartsShop to buy it, so the Gold amount is the same amount so I would like to buy it again. Installation and shape selection etc from Shop etc. It is Recommendation for those who do not need it.
View DetailHelpful?
Fits:HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm), HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Jun 21, 2012
[Webike Monitor] SRX-6 under
Restore was purchased from a price being cheap in this Handle for the time being for Up-Handle-izing.Compared with the Separate handle of a NORMAL, it became Grip 1 duty this side and a top.It is touch to carry out on back Grip 1 duty.
Helpful?
New Custom Articles
