Used for APE 100
Installed on Direct.comTop Bridge
I hesitated with Type 1, but I decided to use Type 0 which is the closest to Straight!
There is a Mini type in the type 1, and I was lost, but I think that everything probably interferes.
You can buy a Model 0 or Model 1 or both and still have a good cost.
SSC Cap is used for Bar End
No Weight, no problem.
- Instock
20.39 USD (3,129 JPY) 20.86 USD Save 2%
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
APE 50
08-12 (FI Drum brake models)*Processing of switch hole is required|*Clutch cable must be changed.
-
MONKEY
09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
-
APE 100
-12 (Drum brake models)*Processing of the switch hole is required for APE100 (09-) only|*It is necessary to change the installation of the clutch cable.
-
APE 50
-07|08 (Carburetor) *Only for APE100 (09-), it is necessary to drill the switch hole|*It is necessary to change the clutch cable.
See all
HONDA
-
TW225E
00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable and brake hose.
-
TW200E
-99 (Drum brake models) *Changing the throttle cable, clutch cable and brake cable is required.
-
TW200E
00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable and brake hose.
-
SR500
88-00 (CV Carb) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable, decompression cable and brake cable. |*Install with the bar end raised.
See all
YAMAHA
-
GRASS TRACKER
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
Universal
Product detail
Handlebar color: Black
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Full width: 670mm
Effective width of holder installation part: 160mm
Pullback size: 60mm
Insertion angle: 9 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Double anti-corrosion treatment by acrylic coating over black chrome plating.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.