It attached to GB250.
It is OK with pure wires.
Satisfactorily [ management ], from normal, it is risen a little and a riding posture becomes easy.
The texture of plating is good.
- Instock
20.67 USD (3,129 JPY) 21.13 USD Save 2%
Delivery Information
In Stock : 2 left, Ships within 48 hours.
Estimated arrival date around
FITMENT
-
CB400SF
99-07 NC39 VTEC III*Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
-
CB400SF
99-07 NC39 VTEC II*Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
-
CB400SF
-98 NC31 *Processing of switch hole drilling required|* Side cap required (For inner diameter φ18mm)
-
CB400SF
08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter φ18mm)
See all
HONDA
-
XJR400R
01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.
-
XJR1300
00-06 (RP03J) *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)|*Please install with the bar end raised.
-
XJR1300
07-12 (RP17J) *Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please raise the bar end.
-
TW200E
00- (Disc Brake Car) *Processing of switch hole is required
See all
YAMAHA
-
ST250
-07 (NJ4AA)(Carburetor model)*Processing of switch hole required|*You can use normal side cap.
-
ST250 E Type
-07 (NJ4AA)(Carburetor model)*Processing of switch hole required|*You can use normal side cap.
-
GSR400
-12 *Ask to drill switch holes|* Normal side caps can be used.
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
See all
SUZUKI
-
BALIUS
91-94 *Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
-
BALIUS2
*Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
-
ZEPHYR750 RS
*Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
-
ZEPHYRX
*Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
See all
KAWASAKI
-
Universal
Product detail
Handlebar color: Chrome plated
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 60mm
Full width: 605mm
Effective width of holder installation part: 125mm
Pullback size: 195mm
Insertion angle: 45 degrees
Forward leaning angle: 60 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.