Handlebar Hole Drilling Guide

Fits:KAWASAKI ZRX400 -04, KAWASAKI ZrX1200ZrX1200 DAEG , KAWASAKI ZRX1200R , KAWASAKI ZRX1100II , KAWASAKI ZRX1100

Anonymous

Excellent

May 27, 2022

Quality tool

As always the package reached on time. Tool is very light and serves it purpose. Quality and craft of tool is great and will stand for a long period of time. Great product and recommended to have.

Helpful?

I can make a perfect hole.

Fits:KAWASAKI ZRX400 -04, KAWASAKI ZrX1200ZrX1200 DAEG , KAWASAKI ZRX1200R , KAWASAKI ZRX1100II , KAWASAKI ZRX1100

Japanese Webike user

Very Good

May 2, 2021

When I tried to make a hole without using Hole Guide before, I couldn't make a hole well, but I can make a hole well by using this Hole Guard.

Helpful?

Fits:KAWASAKI ZRX400 -04, KAWASAKI ZrX1200ZrX1200 DAEG , KAWASAKI ZRX1200R , KAWASAKI ZRX1100II , KAWASAKI ZRX1100

Japanese Webike user

Excellent

Nov 5, 2020

It's good

It's good for when you want to get the Handlebar out a bit earlier.
I thought it was strong and solidly built.
So far it has worked fine.

Helpful?

It's reassuring to have one

Fits:KAWASAKI ZRX400 -04, KAWASAKI ZrX1200ZrX1200 DAEG , KAWASAKI ZRX1200R , KAWASAKI ZRX1100II , KAWASAKI ZRX1100

Japan User(translated)

Average

Apr 15, 2019

It is used for the installation of the company's Separate handle
It is easy to use

Merit
Drilling is easy to do

Demerit
Low cost of 3,000 yen for a single use

Helpful?

Fits:KAWASAKI ZRX400 -04, KAWASAKI ZrX1200ZrX1200 DAEG , KAWASAKI ZRX1200R , KAWASAKI ZRX1100II , KAWASAKI ZRX1100

Japan User(translated)

Average

May 24, 2013

In the case of the Handlebar of an external article, there is no hole open since a Switch box etc. are fixed (unless it is some exclusive elegance very much) for baffles to a pure thing.Although some
> people will cut off the projection by the side of a VOX with Nippers etc., this is a dramatically dangerous thing.Although there is also a method of fixing with a Firmly with the polyester system adhesive bond of a 2 liquid hybrid model, when it is s, if a Handlebar is replaced again and it excels, naturally the whole Switch box will be called exchange.

When getting it blocked and replacing a Handlebar, it is necessary to process drilling using a Drill but, and if it is a product made from an Aluminum, the work which makes a hole in a Pipe vertically better about what has high rigidity is as difficult as unexpected.Even if it is carrying out the Marking to the part to make the
> hole in, once a Drill is slippery during work and a strike shifts, it will become next to impossible to add correction to the place aimed at once again from there.If the
> hole is extended, and a fixed meaning will not be accomplished and it will become so, about a Switch box, a compromise is reached in the bent position, or there is only newly rebuying a Handlebar.It must be better to make appropriate investment rather than he repents without buying it, although it does not use frequently.

After fixing to a Handlebar with the 6-mm Hex Bolt in right and left, this product tightens lightly a central penetration Bolt (the hole of the diameter of 5 mm is open), and inserts a drill edge by considering that hole as a Guide.Although many hours are firmly spent before

work and that it is necessary to carry out a Marking does not change, the drilling itself can be performed now certainly successful.Since it is called the product made from

HURRICANE, it is a fly in the ointment that it is price setting out to the extent that a Handlebar can buy one more, but.Since an equivalent device practically equal exists in user-friendliness at a half-the-sum grade or the price not more than it, I regard how to twist the prejudice to Brando as or enough with such goods.