Slant License Plate Bracket

What made you decide to buy?
My 6R I installed Active's Fender Eliminator Kit last year. The Fender Eliminator Kit is designed to meet the new standards for the first year, so the Number angle is a little Large…Number angle is a little Mischief style when you want to DAYTONA.:I came across Slant License Bracket. (Lol) This Slant License Bracket is applicable to PCX, FORZA, and Address. 125. However, the images and impressions posted by users who have installed the product on other models were very helpful and led me to purchase the product.

How was your experience with it?
As expected. The number from the back is not at an angle where you can't see it from the back like the Mischief people, but I think it fits at an angle where you can see it from the back as well. I think it's OK for me, but … that's your own responsibility.
If you are considering purchasing the Slant License Bracket, it has an angle of about 25 degrees. Fender shape to be installed (OEM or Other Brand Product) I think the angle will change with Installation is at your own risk.

[Others]
The number attachment pitch is 12, which can be attached to 125cc to liter machines. The body is compact but solid, and bolt is welded to fix Fender and Number. The following is an example. This welded bolt is about 13-14mm on the Fender side and about 1mm on the Number side. Please be careful when installing the product. The difference in length can be seen visually, and a cap nut and washer are attached to the number side when the unit is packaged.

From here, Active installed in 6R.:If you have installed the Slant License Bracket, you can install the License Plate Light and Number with Limit.:The installation had to be done while successfully crossing the License Plate Light before setting. Also, with the NumberCover in place, it was thicker and I felt that the nut was not tight enough, so I removed the NumberCover and installed it this time. I felt that the parenthesis was more Refreshing and better without the NumberCover. (Lol)
I think it is necessary to check to make sure that it does not come off due to driving vibration when it is last driven. If you drop the number without knowing it when you drive a long distance or drive at high speed, … it is necessary to check it. In my case, the Fender side is tightened with a nut with a loosening stop.

It is very strong, but although it is painted, it rusts easily. I also bought a Plate Holder because if you attach a number to this bracket alone, the number will easily bend if it gets caught or hit by something.

[How is it used?
I have a YZF-R1 with a Fender Eliminator, but I was concerned about the angle and bought this product that suddenly caught my eye.
It is not in the compatible car models, but of course the License Plate is the same size, so there was no problem about the installation.

Was the one you received as per Image?
It's a DAYTONA product, so the quality is solid.
Nut for installation is also included and helpful.

How was your experience with it?
It only takes a few minutes to install.
I have a DAYTONA Dr-Recorder, but I was able to use it by just replacing it without having to relocate it.
When I installed it, the angle of the Number itself was exactly what I was expecting, and I am satisfied with the product.
But this is completely a matter of personal taste now. "There's something not quite right about it. I'm worried that I'm going to get a lot of laughs.
It is very difficult to understand the difference between these parts without installing them on the actual car.
If I don't feel any discomfort after using it for a while, I'll leave it as is.

How did it compare to other products?
I compared it with a very small bracket from a certain large hand ShoppingSite.
I chose this product because I could only see a future where it would obviously be Garbage and I could expect it to be of good quality.

【Review】
You can change the angle of the License Plate by DIY, but it is not possible to change the Quantity:Pair (for Left and Right) If you use Universal Product, you may get Rose Tsuki. (And at a reasonable price.) I'm grateful for the solution.
If you want to use it for other car models, you should check if it is large enough to be legal.

I thought about installing it on Fender Eliminator on another vehicle but I could not install it without clearance with License Plate Light

Put this item to cut the Rear Fender of Address and angle it to a near vertical number.
Is it because the vibration is Large in Single? Another Fender Eliminator is a strong Type that also fixes SIDE and more than double the price. Is that necessary?
Certainly, when running after installing, the number is fluttered, but if you prevent vibration from breaking out Number, you can either add Cushion between Number and Bracket or attach License Plate Holder
Is it okay.
There is no extra Bracket next to it, so I'm satisfied as I'm refreshing.