Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Type] Up Handlebar for Tapered Handlebar Models [Material] Aluminum, Anodized surface treatment, Throttle section mirror finish [Specifications] Bolt-on installation, switch fixing holes pre-processed, no need to replace brake hoses, wiring, etc. [Position] ○MONSTER1100 / 796 series: Height 30mm up, width 35mm down, aperture 15mm forward ○Streetfighter series: Height: 25mm Up, width: ±0mm, aperture 20mm in front ○M1200 series: Height 20mm up, width 45mm down, aperture 10mm forward
*The color of the rod has been slightly changed since the production rod in June 2015.The photo shows the color after the change. *The position values may vary depending on the angle of the handlebar.
* The image is only for reference. The image shown may differ from the actual product.
■Product Concept In recent years, new Ducati bikes have been fitted with tapered handlebars from the start.Tapered handlebars have the advantage of increased strength and reduced deflection of the handlebars when weight is applied, such as during braking. However, it was difficult to fabricate the high handlebar. de LIGHT has created this handlebar from scratch specifically for Ducati, seeking a "comfortable position". In pursuit of various "a little more", De Light has made a handlebar that is more comfortable than a stock handlebar and does not lose performance. The handlebar itself is equipped with mounting holes for switches, etc. for easy installation. Also, the wiring, hoses and cables can be installed without changing.Please try the handlebar that pursues the "a little more" that de LIGHT sought.
■M1100 / 796 Series The first thing that strikes you when you put these handlebars on MONSTER series is that they are not wide enough. The stock handlebar is wide and tends to lean forward, but the width is narrowed by 35mm, so it feels moderate. Also, the height is increased by 30mm, so you can ride comfortably even if you use it for touring. This handlebar is recommended for touring users. It can be used for MONSTER1100 EVO / 110S / 1100 / 796. It is also compatible with the vehicles equipped with ABS.
■Streetfighter Series If installing this handlebar on STREETFIGHTER, it will give you a good position, not too extreme. The width of the handlebar is the same, but the height is increased by 25mm, and it seems to come to the front of the handlebar. This is a good handlebar to improve the position of the STREETFIGHTER without compromising the performance of it, which has a reputation as an aggressive naked bike. You can install the stock windshield without any problem. Fits STREETFIGHTER S / STREETFIGHTER / STREETFIGHTER 848.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I installed it in Street Fighter 848. The replacement work itself is simple and easy. Since the fixing hole is also opened in advance, no additional work was necessary. But, the position of the fixing hole on the Throttle side is not good. The angle where the hanging angle does not have just the Handlebar (The angle at which it becomes the highest) , Accelerator Wire hits Tank when trying to fully lock to Right.
If it is set at an angle that can avoid this, it is unpleasant that it hangs with a hanging angle. STREET type Handlebar So this angle is a bit - - - However, since there are even holes in two places, I do not want to add any more. Moreover, since it becomes close to the existing hole when opening it, the anxiety remains strengthally.
Since it can not be helped, I think I will adjust the handle stopper.
Before OEMHandlebar 3. Aperture comes out about 5 cm, the height is 3. It rose about 5 cm, so we decided to take good care of driving.View Detail
Mounting on MONSTER S2796 Since Normal handle is wide and low so much, it becomes a forward tilted posture for Naked motorcycle, and it gets tired a little if it is a long distance. It can not be helped because it is not optimized for Japanese.
This Handlebar is a Switch boxetc. The installation position hole has also been processed, so it can be easily replaced. There are holes for several models.
Position is optimal. It is the same level as the domestically produced NAKED Position, and it is the height which can apply elbows to Tank even when running in Sports.
Although the height of the price is Neck, performance can be satisfied.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!