Valve type: H7 Kelvin: 6000K [Set components] Main unit of burner (valve) Waterproof thin digital ballast (with igniter control unit) Relay Harness User's Manual (English text)
*Please make sure to check the size and shape of the valve on your vehicle before purchasing.
The burner (valve) part is made of UV-processed quartz glass, which has excellent corrosion and heat resistance, and prevents the deterioration of parts and lenses caused by ultraviolet rays.It is also resistant to sudden changes due to heat and prevents the valve from being damaged from both inside and outside.(Quartz glass is a high-purity glass made of quartz) The brightness of HID is about 5 times brighter than halogen bulb.It is designed to be battery friendly with low power consumption. It has a long life span and lasts about 3 times longer than halogen bulbs. Digital ballast / Conventional analog ballast could not supply stable voltage and current to the burner. By adopting digital ballast, this product automatically adjusts the voltage inside the ballast from 9V to 16V, and controls stable voltage and current to suppress flickering when lighting and maintain constant brightness. Thin design with a thickness of about 17mm!The thickness of the ballast is about half of that of the conventional thick ballast, which solves the problem of installation location!Of course, not only the thickness but the overall size has been successfully reduced!
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
Basically it does not ride at night, but Tunnel part etc. I was concerned about the darkness and replaced it. I purchased this if I aim for cheap cheap, was prepared to become a pillar (Lol) There is not Impre also ... (Lol)
Because it is this price with Relay, honestly I was disappointed but it was betrayed in a good way. By the way it is 35 w 6000 k. In our Motorcycle, we do not need an adapter, so we can do it as simple as Halogen bulb. There was also no defective product such as Wire on the light-emitting part in cheap comes up.. In addition, in the case of a common Rubber part, in my case purchase a Circle cutter at 100 ha and if you open a hole of about 20 mm in diameter, Valve also comes with the attached Rubber packing just the same. Waterproof processing is not required. And you can just attach it to Headlight cleanly. Because Ballast is also a compact, the degree of freedom of installation seems high. I also get the impression that the fitting of Connector is also not particularly dissatisfied and it is good for the price. There was slightly dirty Valve, but it is sufficiently acceptable range from the price. Is it about several seconds until the light stabilizes? Although this neighborhood depends on the subjectivity, I do not feel dissatisfied. I think that it is rather early. I'm on a SUBARU car, but the same etc. I received the impression of the earliest. There is neither strange luminescence nor glare with beautiful coloring. I am relieved that CutLight also comes out very beautifully. CutLight fell about 2 cm from Halogen, but I am using it as it is. This neighborhood depends on Lens and Reflector, so it is not bad. Brightness is quite inevitable, does not it compare with Halogen. Blue It is a beautiful white color with less taste. In my opinion, I think that it is close to Level which can safely say OEM. There may be a win and loss, but this quality is satisfying with this quality at the price of Halogen bulb as a little better eyes. It is unnecessary if you can do DIY somewhat, but the instruction manual is in English. For the Wiring diagram, please translate it into Manufacturer HP (Please enter here for the Wiring diagram so please refer to it. It's only durability after that (Lol) By the way it is good to have Valve out on the road, the replaced Halogen bulb is put in the ValveCase attached to this product and put under Seat.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!