In pursuit of light weight and high precision, the front surface is machined 360° by CNC machine to the smallest detail.Foldable design minimizes lever breakage from falling.In addition, an automatic lever return system with a built-in spring is adopted to enable the machine to be restarted immediately after a fall.High strength aluminum alloy is used, and anodized surface treatment is applied.
Why is there a need for the lever to collapse forward? If the lever is broken, it will cause a significant slowdown and loss of riding.As a cause of lever breakage in the event of a fall, a force applied in the direction of (1) will push the lever in the direction of (2), and a ordinary lever with no place to escape the force will often break.However, the pivot lever CP has a second indirect "pivot" that allows the lever to move in the direction of (2) when it is subjected to impact, such as when it falls, making the lever less likely to break.The "pivot" point is equipped with a strong return spring so that the lever will return to its original position when the bike is raised after a fall and will not tip forward during normal riding. In addition, the risk of damage to the levers can be reduced by installing the Rotating Bar Clamps at the same time.
●Foldable lever In the event of a fall, the lever moves forward to absorb the impact.Automatic lever return system with built-in spring. ●Adjustable The best lever position can be set as full adjustable without changing the clutch space. ●Full surface machining Thoroughly pursuing light weight and high precision, the entire surface is machined by CNC machine.ZETA logo on the front to prevent slippage.
●K-type is for public road vehicles with a switch box.M-Type is for racers without a switch box.M-Type is not for public road use.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I used it on my WR250R which is equipped with Magura 167 Hydraulic Clutch. The installation itself was absolutely flawless. [Color] I cleared it. However, when I cut the clutch, it interferes with the switch box, so I need to shave the switch box, change the angle, or shift the master itself to the right. In the image, I made the switch box up to the limit and moved the master to the right.View Detail
역시 제타네요. 비교적 저렴한 가격에 만족도 높은 튜닝입니다. 교체작업 5분이면 충분합니다. 기존 제타 너클가드와 순정브레이크레버가 간섭이 있었는데 이 제품으로 교체 후 문제없어졌고 스리핑거 그립은 너무 편안합니다. 알루미늄 cnc라 고급스럽습니다. 망설이는 분들 하세요!!View Detail
Overall I am quite happy with this brake lever. It was hard to determine comparability but after some research I can confirm that these K-type levers are compatable with the Yamaha XT-250/ Serrow 250 control boxes.It is somewhat difficult to find 4-finger levers but these are a quality option. Unfortunately Zeta has very limited colors for their 4-finger levers so you are not able to customize your looks as much as their 3-finger options. There are other options out there for much less expensive control levers, I'm sure Zeta has nicer machining and finish than the less expensive options, but I am not sure it is worth the price premium. Zeta does offer replacement levers in case you somehow damage them in a fall, so you do not have to replace the entire assembly which is a nice feature. Being a pivot lever they do offer that extra protection in case of a fall. Having a reach adjustment is also very welcom since I have smaller hands and the stock levers stuck out farther than I prefer.Installation was quite easy, just unbolt the old lever and bolt on the new one. The action is very smooth and the levers sit securely in the perch. Thankfully unlike by clutch lever this brake lever has no wiggle to it. If it does happen to have it you could try shimming the gap with some brass washers or I have also heard other people using a vise to squeeze the perch to eliminate the gap.Shipping from Japan to the West Coast of the United States was very quick. The levers can in a standard blister pack that protected them in transit and they came to me in perfect condition.View Detail
The machining and finish on this lever is excellent. I could not find any imperfections on it. It was rather difficult to determine comparability before I purchased it but I can confirm that the K type lever is compatable with the control boxes on a Yamaha XT250/Serrow 250.Overall I am pleased with the lever. The options for 4-finger levers are more limited than the 3-finger versions. For 4-finger you are limited to only silver from Zeta. This is a little disappointing since you can get their 3-finger levers in other colors for more customization. There are much less expensive options out there but I decided to give these Zetas a try. The feel of them is very nice and the action is smooth, but I am not sure if it is worth 2-3x as much as some of the other alternatives. The fact that Zeta sells replacement levers (the flat bar you grip) in case you bend them in a crash is nice and does help make up for that extra cost.Installation was simple much like replacing any clutch lever, just unbolt the existing one, reseat the clutch cable into the new lever, and bolt on the new one. Unfortunately for me, there was a lot of play in the clutch lever when installed (it wiggled a lot in the perch). In fairness I don't know if this is an issue with this lever or with my existing lever perch. I plan to install some brass washers (don't use plastic) to eliminate the gap between the lever and the perch which should improve the feel.Shipping was fast and the levers came secure in a standard blister packaging. No complaints ok that front.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!