[Components] Yoshimura original machined aluminum funnel
[Parts required separately] ・Throttle Grip Inner Pipe for TMR Large Body ・OPEN side throttle wire for GPZ900R (KAWASAKI stock product) ・CLOSE side throttle wire for GPZ900R (KAWASAKI stock)
*Depending on the model year and specifications, secondary air may need to be cancelled. *Parts are required separately for installation. *If the fuel cock interferes with the installation, it may be possible to avoid it by replacing the cock with an external cock such as Pingel (not available for vehicles with fuel pump).
* This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I've been working on the negative pressure OEM carburetor for a number of times and have disassembled and reassembled it and spent tens of thousands of dollars on repair parts, but the condition has not returned and the result is NG. It is my own fault because of the storage condition. It's been more than three years since I've wanted to drive this carburetor, and even though I spent about a third of what it cost to buy it, I couldn't get it back to where it was at the time, so I decided to buy it.:Set+Cook(PinGel standard SEA BASSOEM currently not available)Purchase Timing In the event that you have any questions concerning where and how to use the internet, you can contact us at the web site. (9 years of dormancy + 2 years of maintenance + 2 years of purchase = 13 years of not being able to ride) I spent this time on a moped... Results:RPM Rose behavior when idling, but with pimped carb (slightly increase idle to 800⇒1200 on OEM carb) It's not too bad for a normal cab, but it's not too bad for a low to mid-range cab. If you are concerned about this, I don't recommend it, but I've digested the fact that physical machine sounds can be heard. It depends on the individual, but from around 4000-5000RPM, you will be able to enjoy the characteristic forced revving up. Actual fuel consumption:16.5 mpg in Touring. TMR is thicker than Idling fuel (smells like raw gas). It is not in sync, so I will give it time to work out. I'm also going to change the Slow Jet position to cover the Funnel Sponge filter. The NGcarburetor seems to be a unit that is difficult to restore the fuel path in the body no matter how many tens of thousands of yen are spent on maintenance.View Detail
Very high quality carburetor from yoshimura! fast shipping by web!ke japan, only took 3 days to arrive at Kuala Lumpur, Malaysia. this is the 38mm diameter carb with part number 778-211-3002, but it's marketed as the tmr-mjn34 on the website. the title is wrong! the correct one is mjn38as as per the correct part number. for those who wants to use it with pod filters especially the k&n pod filters or APE filters, you need to purchase the filter adapter separately (part number 797-038-1010) which fits nicely with the k&n filter (part number RC-0984). Definitely a must buy for those who are upgrading / modding. i will install this on my 1981 suzuki gsx1100exView Detail
It is a purchase of the second one, because it is a consumable item it replaced it with a new one.
Carburetor this time was necessary to re-adjust all of the entraining oil and so on, but it is unavoidable to use it as a well adjusted one. Although price is high, it is unavoidable because it costs Cost much more for Body's Anodized and Nozzle processing than ordinary TMR. Performance also runs best all year round if only the connection between Throw and Nozzle is decided. Of course it is better to change Setting slightly in summer and winter. In the secondary Air from Seal Ring peculiar to TMR, I have had a lot of difficulty in recent years. Even if it is a brand new item, it will be bad quickly, but it will not cause any problems. And it's better not to use Carburetor cleaner absolutely, even if Mikuni's Carburetor cleaner. When using it is completely decomposed and use is correct. The movement of Seal Ring gets worse just by slightly inflating VSeal.
I think that it is the best Carburetor setting There is not not setting out or bad reputation, but it will surely come out if you compile Setting. View Detail
The acceleration feeling which cannot be tasted in a normal cab. DOBA& and the useless thing unusually not using [ feel, even so / an axel ] mind which moves do not have brains, either, and it is very easy to treat the red after exceeding 5000 rotations. Although it is not the Kurri Kurri setting in itself, they are contents which can be enjoyed enough. I think that he will be a demon if it comes out perfectly.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!