Super easy to apply with the sperately sold tool. Just follow(translate) the instructions & away you go. Make sure the rim is clean & that you spray each segment of rim with water immediately prior to applying the sticker.Be sure to work out any air bubbles etc from the application process. If it's not sitting correctly-immediately peel back and start that section again before the adhesive begins to bond. It also helps to use a hairdryer on each section after application.The mirror finish really pops, especially at night if light reflects off it at an agreeable angle.
View Detail
26.26 USD (4,078 JPY)
Webike Point: +41 pt
(0.26 USD)
Delivery Information
-
Please select product form first.
Product detail
●Line width: 6mm
●Mirror type
[Set components]
●Rim stripe decal (front and rear wheel, 4 divisions 16 pieces)
●2 spare sheets included
●5 MDF logo stickers
●Instructions on how to apply
**This product is a sticker and decal.
.
The MDF rim stripe changes the image of the motorcycle greatly just by applying it!
Available in 18 colors and 3 different line widths.Available in 1" increments from 8-21".
There are two diagonal renderings for each side.
Features
●Compatible with 8 to 21 inches
Front 17, rear 18 inches and other different sizes are also available.
Special sizes are available in 1" increments.
●UV treated for UV protection
UV processing is applied to prevent burning and color fading due to ultraviolet rays.
●Thick 3-layer sheet processing
Three layer structure of adhesive surface, printing surface and protective surface.
This is a thick, high-grade finish that is different from cutting sheets.
●Semi-circular tip cut
There are no corners on the periphery of the cut, and the shape of the cut is designed to prevent gaps.
●Four-part structure for easy application
The outer circumference of the wheel is divided into 4 parts, so it can be attached without removing the wheel.
●3 types: 4, 6, and 10mm
Available in 4mm, 6mm and 10mm line widths.You can choose from three different thicknesses.
●Spare lines included for peace of mind
Two spares are included for every inch.
It is safe in case of failure.
[rim stripes attaching]
[decal removal]
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
![[a Webike Monitor] -- -- pains were not taken to stick since the pasting Gauge only for a Rim stripe was purchased together.
Since the Mirror type was chosen, it shines with an optical degree, is visible, and good! When sticking, Hitoshi Oishi of a Tire a](https://global-fs.webike-cdn.net/photo/article/85/1371984111085M.jpg)
Installed on: SUZUKI GSX-S 750
Apr 16, 2020
Mirror Rim Stripe이라 그런지 맑은 날에 햇빛에 반사되면 번쩍번쩍하며 눈에 잘 보입니다.시인성이 좋고 반사판 같은 효과가 있어서 안전에도 도움이 될 것 같습니다.6M으로 구입했는데 다음번에는 10M으로 구입할 예정입니다.Because it is a Mirror Rim Stripe, when it is reflected in sunlight on such a clear day, it is bright and visible.It has good visibility and has an effect like a reflector, so it seems to help with safety.I bought it at 6M, but next time I am going to buy it at 10M.translated by google translate
View DetailHelpful?
Dec 23, 2019
It has been installed on the BlackRim of XG250 TRICKER I appreciate it
I chose the Mirror red, when I first got it, it looked a bit plain and I thought it was a mistake I thought I'd like it, but when I actually put it up, it's quite an austere impression
Also, because it is a mirror, it shines depending on the angle from which it is viewed, so there are two different impressions, one austere and the other a bit flamboyant This was a good choice that I never got tired of, as there were
And it's quite conspicuous because it doesn't seem to be around much and attracts the attention of others, my car Makeover and the best self-satisfaction I've ever had
We used the special gauge to apply it The result will be the same as the original
In addition, I think it's good to prepare for installation while crimping with Dryer because it's recommended
I stuck it as it is after Rim degreasing with Silicon-off, but it is still two years old It will not come off
Helpful?
Jul 9, 2019
If you follow the instructions, it's not that difficult to paste
Dryer after pasting is very important. 10mm size is also good
Helpful?
Nov 14, 2016
It is expensive for inexpensive goods, but it is commensurate with it
While bad inexpensive goods are on the market, I chose this because it is a reliable Brand.
Even in the pasting stage, you can stick it cleanly and have no complaints.
No complaints with a beautiful appearance after pasting.
About 1 year passed after pasting but there was no deterioration such as peeling.
Large This item is satisfactory.
It is also a very good point to be able to fine-tune Order.
Helpful?
New Custom Articles
