Today was cold from the morning, the outside temperature was 5 degrees at 10 o'clock,
I ran high speed for about 1 hour but soloTwo was able to be done without hurting my hands.
It is perfect for winter as the wind does not hit the hands.
- Sale
104.45 ~ USD (15,905 JPY) 109.7 USD Save 5%
Webike Point: +159~ pt
(1.04 USD)
Delivery Information
-
Please select product form first.
Product detail
Shield thickness: 3mm
Shield body: polycarbonate
[SIZE]
LENGTH: 150mm
WIDTH: 250mm
DEPTH: 80mm
Stainless steel screw
Polycarbonate Washers
Lock nut adopted
**Not available for SB (Super Bol D'or) and ST (Super Touring).
*It is also possible to install the "Meter Visor" as a stock installed option.
*Mounting bracket is black painted finish (chrome plated finish is discontinued)..
* The image is only for reference. The image shown may differ from the actual product.
Knuckle guard to protect rider's knuckles and fingertips from the wind.
The shield body is made of polycarbonate, and the color can be selected from clear and smoke.
The bracket is designed to be strong enough to prevent rattling even under high wind pressure, and is designed to be bolted on to the left and right mirrors.
・Clutch side has a bracket shape that matches the shape of the master cylinder.
It serves as a turnstile.
・Easy bolt-on design by passing through the throttle wire and fastening to the mirror holder.
■Windshield
・Regarding installing it on with Bikini Cowl at the same time, it is designed to be able to be installed on with "GUYRA Shield" and Bikini Cowl Series by Chic Design.
It is recommended for those who want to further improve the windproof performance.
■Guyra Gauntlet
Knuckle shield to protect rider's knuckles and fingertips from the wind.
Guyra means a suit of armor, and a gauntlet is a piece of Western armor that protects the arm from the fingertips.
It is the only aero-protection that protects the rider's fingertips, which are the armor worn on the bike and require delicate operation.
The shield body with complex curved surface is made of durable 3mm thick polycarbonate.
The high transparency does not spoil the lightness of the handlebar area.
Chrome-plated or black-painted mounting brackets with sufficient strength designed for each model.
The shape is designed to prevent rattling even when subjected to high wind pressure, and is designed to bolt on to compatible vehicles.
A highly durable stainless steel screw, polycarbonate washer and lock nut are used for shield installation.
The design that does not compromise the balance of the vehicle
The handle guard body has a depth of 80mm to provide clearance around the lever without feeling cramped.
In addition, the shape that wraps around the bottom of the lever has windproof performance not only in the fist but also in the fingertips.
Specially designed cut lines are provided for each model to maximize wind protection.
■Easy bolt-on design to mirror holder
Installation is quick and easy as it only needs to be tightened together with the left and right mirrors.
The mounting bracket is specially shaped to fit the brake and clutch area of each vehicle and also serves as a stopper.
Therefore, even though it is a single point fastening, it achieves a robust fixation.
This product is designed to be installed on a stock vehicle, so if you have made any changes to the handlebar, such as to the master cylinder, you may not be able to install this product or you may not be able to get the sufficient windproof effect.
■Select clear or smoke according to your preference.
The clear specification gives a fresh impression without losing the lightness of the handlebar, and the smoke specification gives a tighter impression by increasing the presence of the gauntlet.
■In case of having made the change around the handlebar,
If you have modified the front brake hose or other parts around the handlebar, the brake hose may interfere with the gauntlet depending on the fixing direction.
■If your model is not in the lineup
The models listed above have been tested and confirmed by Chic Design.
If your model shares the same parts around the handlebars as the models in the current lineup, it may be possible to install it even if your model is not in our lineup.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA CB1300 Super Four 03-21
Dec 30, 2015
CHIC DESIGN 's Knuckle guard It' s pretty nice ~
Helpful?
Fits:HONDA CB1300 Super Four 03-21
Dec 11, 2013
This product is absolutely great to decorate the vehicle. It will also guard your hands from leaves and twigs that pop out when driving through narrow roads. It has a strong structure but it's nice to know that you can purchase repair parts just in case. Despite the fact it's designed by model, the bracket interfered with the axle wire on my 2008 year model. I got it installed at a bike shop but it's really tight.
I don't feel any change in protection against the wind or cold temperature but I think it's better to have them than nothing.
Helpful?
Fits:YAMAHA SR400 10-21
May 27, 2022
I bought it for winter protection in the Kanto area and never froze when used with winter Gloves, which are not that thick.
Installation is also easy, as long as the RightMirror is co-tightened with the Mirror and the RightMirror has an Opposite Thread Screw.
The Bracket is solid and the Screen is strong enough to touch.
As is the fate of the SR400, the engine vibration is fine but shaky.
Helpful?
Fits:SUZUKI GSX1400 01-08
Jan 10, 2021
I bought it because I could not stand the strongest cold wave. When I put it on, it didn't look as bad as I thought it would, and I was more than satisfied with the Large effect. The cold wind hitting the fist is reduced, and I think that this is Large sturdy even without Grip heater. It is easy to install and remove, so I recommend it to riders who ride in the middle of winter.
View Detail
Helpful?
Fits:SUZUKI
Aug 11, 2020
It is a necessity in the middle of winter, but it cannot be surpassed by this alone. After that, Grip heater installation. Still cold, Komine electric heat Gloves device. It's still cold. It looks like the image of the armor. But I can't repair the damage if I stumble on it. If you buy the AcrylicGuard part cheaply, you may be able to fit it to any type of armor. However, in winter, in order to change into Long Screen of SEA BASSOEM Product, if you cut all the Handlebar as much as possible, it will hit Screen. You may need longer bolts to remove the Handlebar and fit it back in. Also, please make sure to periodically retighten the Acrylic and Handlebar parts to prevent them from coming loose.
View DetailHelpful?
New Custom Articles
