WaveFloating Discs would be good to lighten the weight under Spring!
It is a little thicker and stronger than NORMAL.
The holes for the meat removal are well shaped and the product is made in Italy and looks good.
It looks more Large than NORMAL.
The hit came out immediately and the braking power was Up.
Disk pat simultaneous exchange is good luck
- Instock
105.67 USD (15,615 JPY) 113.02 USD Save 7%
Webike Point: +156 pt
(1.05 USD)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
Open Fit Model Information Table
-
XR50 Motard
AD14 Front: AD14-1100001 or later 07
-
XR50 Motard
AD14 Front AD14-1000001 to 1099999 05
-
XR100 Motard
HD13 Front: HD13-1100001 or later 07
-
XR100 Motard
HD13 Front: HD13-1000001 or later 05
See all
HONDA
Product detail
Breaking Part Number: HO45FLD
[Dimensional data]
Outer Diameter: 220
Inner diameter: 58
Thickness: 4
Bolt: 3
Bolt Diameter: 10
Total Height (T/H):
PCD: 80
*
*Sold as a single piece.Two discs are required for front double disc vehicles.
*Design and colors are subject to change without notice.
.
* The image is only for reference. The image shown may differ from the actual product.
■Increased braking power
The wave shape and special materials improve the average coefficient of friction by about 20%.
■Weight reduction
The weight of the disc rotor is reduced by up to 18% compared to a disc rotor of the same diameter and thickness.
■Improved operability
The weight of the entire disc rotor has been reduced to reduce unsprung weight, and the weight of the disc periphery has also been reduced to reduce the gyroscopic effect on curves, greatly improving handling stability.Nimble handling is achieved!
■Resistant to thermal hazards
By deforming it radially during thermal expansion, it is highly resistant to thermal distortion, and by adopting a special heat-treated high carbon stainless steel material used only by BRAKING, heat resistance is also improved!
Based on the OKI series developed for motocross and enduro use, this oversized disc rotor is designed for use on public roads.By increasing the diameter of the disc rotor compared to the stock disc rotor, more powerful braking force and control are realized.The rotor uses BRAKING's original wave shape for superior heat dissipation and weight reduction.By setting the rotor thickness in mm, it is suitable for a wide range of off-road and street ridings.The caliper support included in the kit is made of forged aluminum and finished with high precision.The surface is anodized finish.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA NSR Mini RS50 Front 00, HONDA NSR50 AC10 Front AC10-1000001 or later 87, HONDA NSR Mini RS50 Front 02, HONDA NSF100 HR01 Front HR01- 07-21, HONDA NSF100 HR01 Front HR01- 06-21
Dec 25, 2021
Helpful?
Fits:HONDA NSR Mini RS50 Front 00, HONDA NSR50 AC10 Front AC10-1000001 or later 87, HONDA NSR Mini RS50 Front 02, HONDA NSF100 HR01 Front HR01- 07-21, HONDA NSF100 HR01 Front HR01- 06-21
Jun 9, 2018
Purchased because I bent an OEM disc
As OEM also currently makes about 11000 yen, on Wave Disc outside the company
I searched for things that are not cheap and made it.
I think that this is just exactly because appearance is not too flashy.
The price is also reasonable
Regarding the effectiveness of Brake, I changed it at the same time as Pad so I can not say anything, but I feel that it is not getting worse because I feel the same effect as before replacement.
Helpful?
Fits:HONDA NSR Mini RS50 Front 00, HONDA NSR50 AC10 Front AC10-1000001 or later 87, HONDA NSR Mini RS50 Front 02, HONDA NSF100 HR01 Front HR01- 07-21, HONDA NSF100 HR01 Front HR01- 06-21
Aug 3, 2016
The fit and finish is excellent. Very impressive quality. The edges are nice and smooth and the overall design is very nice.
View DetailHelpful?
Fits:HONDA NSR Mini RS50 Front 00, HONDA NSR50 AC10 Front AC10-1000001 or later 87, HONDA NSR Mini RS50 Front 02, HONDA NSF100 HR01 Front HR01- 07-21, HONDA NSF100 HR01 Front HR01- 06-21
Mar 23, 2009
In equipping with a tokico radial mount caliper, by a normal disk, since the field was slightly narrow, when many things are looked for, this disk is discovered.
Place purchased since it was stop ability serious consideration in short although there was also a place which is not showy just for a moment .... It is good.
4 pot caliper and the interval have become to the extent that a rear wheel comes floating simply.
A price is also likely to be paid so so, a life also seems to begin to be long, and it is recommended at those who consider exchange.
Helpful?
Fits:HONDA NSR Mini RS50 Front 00, HONDA NSR50 AC10 Front AC10-1000001 or later 87, HONDA NSR Mini RS50 Front 02, HONDA NSF100 HR01 Front HR01- 07-21, HONDA NSF100 HR01 Front HR01- 06-21
Feb 23, 2009
It is cool very much!
It adds to a wave and is floating! A settlement is also a cinch.
It is cool very much!
It adds to a wave and is floating! A settlement is also a cinch.
Helpful?
New Custom Articles
