Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
For NSR50 / 80 wheels Swingarm pipe shape: Triple square Stabilizer: No Material: Aluminum 7N01 material used
*Front offset sprocket 7mm is required for wheel installation. *For twin shocks, mount the chain side suspension on the inside to avoid the chain line. *Only triple square pipe, chain slider is also attached at the bottom. *Image 1 shows the option: Eccentric chain pull. *Image 3 is the installation image of the pipe shape: Triple Square Mini. *Image 4 is the image of (1) black anodized finish and (2) Cerakote finish. *Image 5 is optional: This is an image of the chain slider bolt fixing. *Image 6 is optional: The image above shows Stand Hook Base (M6). *Image 7 is optional: This is an image of the pivot bearing specification. *Image 8 is an image of the chain pull option. (1) Chain adjuster: Back pull type (2) Chain adjuster: Standard (Racing stand hook specification) (3) Chain adjuster: OW type (Racing stand hook specification) (4) Eccentric type
* The image is only for reference. The image shown may differ from the actual product.
This is a swingarm that can be used with NSR50 / 80 wheels on Dux / Chaly. Swingarm width is 184-187mm. It is possible to use NSR50 / 80 12 inches wheels to make your Dax 12 inches. Please use G-Craft part number 33136 for the caliper support.
■Option Description [Swingarm finish] ・Black anodized finish (G-Craft part number: 60198) ・Cerakote finish (G-Craft part number: 60807) [What is Cerakote?] Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military. It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production. Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns) Weld marks (beads) can be left on the surface without being hidden. The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones. *Please allow 3 to 5 weeks for normal delivery. [Option 1] Chain slider bolt fixing specification (G-Craft part number:60228) Change the chain slider from riveted to bolted.Easy to replace when worn out. [Option 2] Stand hook base (M6) additional processing (G-Craft part number: 60903) G-Craft stand hook or aftermarket stand hook (M6) can be attached. [Option 2] Pivot part bearing specification (G-Craft part number: 60006) The standard is to change the pivot part of the bushing to a bearing. Improved durability and smooth operating characteristics. [Option 3] Chain pull option ・Racing stand hook specification (G-Craft part number: 60186) The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed. *G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere) ・Back pull type (G-Craft part number: 60221) This backward pull adjuster is designed to eliminate the hassle of adjusting the chain. Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools. *Can not be installed on the racing stand hook specification and OW type at the same time ・OW type (G-Craft part number: 60014) The chain puller is tapered to eliminate vertical misalignment of the axle shaft. The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes. ・OW type racing stand hook specification (G-Craft part number: 60188) The rear part of OW type chain pull is changed to stand hook specification. G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed. *G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere) ・Eccentric type (G-Craft part number: 60199) This is an eccentric type chain puller commonly found on Kawasaki motorcycles. *Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models. *Swingarm for wide wheel can be used only with disc specification.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!