outline
Hook bolt for Maintenance Stand.
Reason for purchase
I decided to buy a J-trip Rear Maintenance Stand, so I decided to buy a Hook bolt that is compatible with the Rear Maintenance Stand also made by J-trip. If you use J-trip's Hook bolt, you need to be careful because the shape of the Hook bolt may not match with other company's one.
In addition, because I have seen the comment that the color falls by the wear etc. though there are various colors in Lineup, I decided on Silver color which seems not to worry about the color fading because the material is Aluminum.
Appearance etc.
HookQuantity:2pc. Set, ColorQuantity:2pc. Set, BoltM8×35 is Quantity:Comes with 2pc.
Cut-out of Aluminum2014 material.
Mounting method
The model number of the compatible Hook bolt is different depending on the type of car, etc., so we recommend you to check the official website to choose the right one. JT-107D-SL which I bought this time is compatible with ZX-10R (2021) I was able to install it on the
The STAND used is JT-125, and the receiving Bracket is a combination of V-type JT-107V1.
Please note that this product cannot be used on motorcycles that do not have a mounting hole in the Swing Arm of the motorcycle.
It is very easy to install, just put the collar in the hole of the Hook and attach it to the mounting hole of the MotorcycleBody with Bolt. You may lubricate the collar with Grease etc. I sprayed the collar with silicon spray. I think it is standard torque because there was no description of the installation torque etc. I tightened it by hand and tightened it with a tool at the end so as not to tighten too much.
Impression used
When I first shifted up, the hook receiver was a little out of the groove on the hook side, so after I shifted down, I adjusted the position of the hook receiver side to fit the hook groove and was able to use it safely.
Improvements
There are no particular problems.
- Sale
- Instock
19.41 USD (2,946 JPY) 20.32 USD Save 4%
Delivery Information
-
Please select product form first.
FITMENT
-
Universal
-
Except for the GSX250FX
-
ninja
18-
-
NINJA1000 (Z1000SX)
(14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock, it is strongly recommended to use the L-interface.
-
NINJA400
18-21 EX400G-A23119
-
Ninja 1000SX
(14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock, it is strongly recommended to use the L-interface.
See all
KAWASAKI
-
749
-
Late 999
-
S1000R
-
S1000RR
-
DAYTONA675
10- *Calipers are required to measure the hole diameter
Product detail
[Quantity] 2 pieces 1 set
[Material] Made of aluminum (2014 material)
[Specifications] Mounting bolt size: 8mm short
**This product does not fit GSX250FX.
*(14-) Z1000・Z800 / (14-) NINJA1000 must be removed while riding because the hook bolt will hit the silencer when the silencer is stock.Or, choose L from the beginning.
*HONDA / SUZUKI / DUCATI / KAWASAKI vehicles are equipped with a V-receiver set 1: JT-107A1 is recommended.
*For BMW / TRIUMPH vehicles, V-receiver set 2: JT-107A2 is recommended.
*Please check the size of your vehicle before ordering.
*There may be changes in product specifications due to the manufacturer's reasons.
.
* The image is only for reference. The image shown may differ from the actual product.
It is a combination of hook bolt and slider for swingarm.
It looks sporty and practical, and the swingarm looks tighter just by installing it.
Made of cost effective 2014 materials.
It is recommended not only for its high strength but also as a casual accent.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.