here is BRAKING Wave Disk on my 2002 Honda Spacy 125, same size original disk with original Nissin calipers two piston, Daytona Hyper Sintered Brake Pads and Hell stainless steel brake line. It look very nice, strong, sharp and very sexy :), easy control, improved effective braking during on the trip. This Braking ware disk seem less hot than original disk i'd used.
View Detail
- Instock
56.22 USD (8,855 JPY)
Webike Point: +89 pt
(0.56 USD)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
Open Fit Model Information Table
-
Via.
97 Front AF43-0000001 or later AF43
-
Spacey 125
98 Front JF04-1100001 to 1199999 JF04
-
Spacey 125
95 Front JF04-1000001 to 1099999 JF04
-
Spacey 125
07 Front JF04-1600001 or later JF04
See all
HONDA
Product detail
Breaking Part Number: HO32FID
[Dimensional data]
Outer Diameter: 190
Inner diameter: 58
Thickness: 3.8
Bolt: 3
Bolt Diameter: 10.5
Total Height (T/H):
PCD: 80
*
*Sold as a single piece.Two discs are required for front double disc vehicles.
*Design and colors are subject to change without notice.
.
* The image is only for reference. The image shown may differ from the actual product.
■Increased braking power
The wave shape and special materials improve the average coefficient of friction by about 20%.
■Weight reduction
The weight of the disc rotor is reduced by up to 18% compared to a disc rotor of the same diameter and thickness.
■Improved operability
The weight of the entire disc rotor has been reduced to reduce unsprung weight, and the weight of the disc periphery has also been reduced to reduce the gyroscopic effect on curves, greatly improving handling stability.Nimble handling is achieved!
■Resistant to thermal hazards
By deforming it radially during thermal expansion, it is highly resistant to thermal distortion, and by adopting a special heat-treated high carbon stainless steel material used only by BRAKING, heat resistance is also improved!
Based on the OKI series developed for motocross and enduro use, this oversized disc rotor is designed for use on public roads.By increasing the diameter of the disc rotor compared to the stock disc rotor, more powerful braking force and control are realized.The rotor uses BRAKING's original wave shape for superior heat dissipation and weight reduction.By setting the rotor thickness in mm, it is suitable for a wide range of off-road and street ridings.The caliper support included in the kit is made of forged aluminum and finished with high precision.The surface is anodized finish.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA Lead 50 93 Front AF20-1200001 or later AF20, HONDA Lead 50 01 Front AF48-1200001 or later AF48, HONDA Lead 50 98 Front AF48-1000001 or later AF48, HONDA Lead 50 99 Front AF48-1100001 or later AF48, HONDA Lead 100 01 Front JF06-1200001 or later JF06
Fits:HONDA Lead 50 93 Front AF20-1200001 or later AF20, HONDA Lead 50 01 Front AF48-1200001 or later AF48, HONDA Lead 50 98 Front AF48-1000001 or later AF48, HONDA Lead 50 99 Front AF48-1100001 or later AF48, HONDA Lead 100 01 Front JF06-1200001 or later JF06
Oct 23, 2017
The product is very nice and its shape is also Parenthesis nice.
I could do installation without difficulty
You can be safe without running discomfort!
Custom is a good item to bring
I just do not know if it should take something like Seal pasted on discBody or not
You might as well take better as you care!
Helpful?
Fits:HONDA Lead 50 93 Front AF20-1200001 or later AF20, HONDA Lead 50 01 Front AF48-1200001 or later AF48, HONDA Lead 50 98 Front AF48-1000001 or later AF48, HONDA Lead 50 99 Front AF48-1100001 or later AF48, HONDA Lead 100 01 Front JF06-1200001 or later JF06
Oct 30, 2015
Restore of ns - 1 has finished for the amount of Large so get it and get used to it!
I think that Rear disk is crooked
As I push it I'm going to be ... dragging ... I thought that the Caliper oh and still sounds ...
That is why I decided to exchange discs Front made it outside the company so Rear should do it properly
I chose it like a lol
I also liked the appearance
After exchanging it is OK as noises and dragging cease to worry.
However, as for the new article, Brake does not work anyhow ... I think I'm going to thoroughly practice it.
Helpful?
Fits:HONDA Lead 50 93 Front AF20-1200001 or later AF20, HONDA Lead 50 01 Front AF48-1200001 or later AF48, HONDA Lead 50 98 Front AF48-1000001 or later AF48, HONDA Lead 50 99 Front AF48-1100001 or later AF48, HONDA Lead 100 01 Front JF06-1200001 or later JF06
Feb 25, 2013
A Bore up is carried out, a Brake has uneasiness, and it decided on Brake strengthening.It was used together with
brembo new Crab.
It is uneasy dissolution in true controlling force.Since the
> price is also cheap, it is a Recommendation.
Helpful?
Fits:HONDA XR50 MOTARD 07 AD14 Front AD14-1100001 or later, HONDA XR50 MOTARD 05 AD14 Front AD14-1000001 to 1099999, HONDA XR100MOTARD 07 HD13 Front HD13-1100001 onwards, HONDA XR100MOTARD 05 HD13 Front HD13-1000001 or later, HONDA NSR80 95 HC06 Front HC06-1600001 onwards
Installed on: HONDA Super Cub C125
Apr 15, 2024
The 3 hole Braking disc rotor from Italy is a really nice design, especially for the price. So far have been riding my Honda Future 125fi scooter and there are no disc brake marks of wear so far even after some time riding. It was either this or the floating disc option, but based on cost and design I went with the Braking disc as it's designed for heat reduction and would not be riding on a large displacement engine.This also matches my front rotor Braking disc oversized. Just love the design and good quality!!!
View Detail
Helpful?
New Custom Articles
