Screen [SR Type]

Running the dark smoke for street riding which is fine , but limits vision for certain riding conditions such as night riding prone . The screens are well manufactured as you would expect , been relying on zero gravity screens from the 90's for various bikes I have owned . The clear screen is perfect for track use , the half smoke is great for street and also okay for track use .

Personally, I do not like bubbles that I've mocked up, or the standing up Touring type.
I like Category's low type, so I do not like CORSA either.
The ZX - 14R had its original rectification effect low, so MARC 1 was also out of the candidates.
So I decided on SR Type with Style similar to OEM.

Accuracy, quality is not complain!
I also like the shape.
I do not care because Cospa does not care.

Rectification effect is not as good as OEM.
Height 176 cm, 80 km, TanClock of GIVI is wearing.
For that reason, I will not run as if I am completely down.
Even if you lie down a bit, the wind hits the shoulders.
Even if TanClock is removed and completely lying down, the wind hits the Helmet.

Color is Dark smoke.
I will not run downhill, so I'm good, but I can not see it well in the daytime.
I can not see at all at night.
I will never be able to shoot through the screen.

By the way, I can not see it well, but there is no distortion.

Previously I used the same ZERO GRAVITY screen Dark smoke.
This is just a preference, I felt the dark smoke was too dark so I changed back to the OEM.
Recently some damages were getting more noticeable, so I bought ZERO GRAVITY again but this time was clear color.

and I choose SR type so that it keeps the normal look.
It is a little higher but the reduction of wind pressure is same as a OEM screen.
If you want to reduce the wind pressure
you should choose either a double bubble type or sport type.

This item was my favorite besides the darkness so I am satisfied with its shape, quality, and fitting.
The view is much better now with lower riding position, but it is pity that none notice I changed the screen.

[Usage]
Street riding, touring, mountain passes

Was the one you received as per Image?
MRADouble bubble that I have been using. [Color] Smoke is not bad, but I didn't like the design of Screen's step in my Image, so I decided to use SR Type's [Color] I thought that Smoke was something close to my Image.

Was the installation difficult?
If you don't fasten the bolt temporarily on the diagonal line, the bolt hole will not be even etc. and you can't install it. Also, the Washer under the Bolt is a Black Material.:I replaced it with a new one from Plastic.

How was your experience with it?
I think the design and the way it looks depending on the riding posture are perfect.
・ [Color] Smoke, but I don't think it's a problem for ETC.

[Included Parts:were they on?
It was only this product. I'll check at the next inspection if I don't need the molding on the edge when I inspect the car.

[Was there anything that disappointed you?
The bottom part of the Screen of MRA has Gradation, and the area around the Meter was not visible. [Color] This is Smoke, but you can see the bottom of the Meter.

[Opinions and requests to Manufacturer
I want LogoSealZEROGRAVITY to be able to retrofit without putting it on Screen.

For ZX-14R, just remove the OEM bolts and replace them. It's super easy. Just. [Color] The smoke is quite thick, so it is better to choose the Light smoke type for circuit use.