Since the pure handle had been bent, it exchanged.
Although exchange has taken time very well, it is a level which an amateur can also exchange.
After exchange rides easily more than pure, and can also manage long touring now comfortably.
Please try.
36.27 USD (5,457 JPY)
Webike Point: +55 pt
(0.36 USD)
Delivery Information
-
Please select product form first.
Product detail
Type: EZ-FIT
Material: Aluminum
Processing: Switch hole machined
Size: Travel 6mm UP / 7mm BACK
Outer Diameter: Φ22.2
Inner diameter: Φ14.0
Dimensions:
・Vertical stock ratio: 6
・Front to rear stock ratio: 7
・Width: 638
・Height: 41
・Pull: 102
・Aperture angle: 24
・Standing angle: 70
**The bar ends are not included in the product.Separately for inner diameter 14Φ (Recommended: EFFEX Handlebar Weights / *W650 excluded) handlebar ends are required.(Stock bar ends cannot be used.)
*Depending on the model, it may be necessary to change the minimum cable routing.
*The cables may need to be replaced separately.
*Some models may not have a switch hole.
*There may be changes in product specifications due to the manufacturer's reasons..
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
■No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
■Switch hole pre-machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
■Shift the lever holder to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA CB400SF (NC31) (verS 96-98
May 25, 2007
Helpful?
Fits:HONDA CB400SF (NC31) (verS 96-98
It is large a small portion of normal differed from for a while.
Operativity became good.
The color chose gun meta in the meaning that only a few asserts KASUTAMU.
Helpful?
Fits:HONDA CB1300 SUPER BOL D'OR 05-09, HONDA CB1300 Super Four 03-09
Installed on: HONDA CB1300SB (Super Bol D'or, CB1300S)
Apr 2, 2024
I ordered these bars hoping they would be a good fit and upgrade for my cb13 I was not disappointed,they look great with the handlebar brace I have already and on the plus side the holes for the standard switches are already drilled out which makes these an easy going job to change
View DetailHelpful?
Jul 31, 2022
It is safe because it is a car model Exclusive Design.
Replaced OEMHandlebar that was bent in a fall.
Since it is a car model Exclusive Design, it is also safe for Cable and other handling.
Helpful?
Jul 5, 2021
I bought it for HondaTODAY which became Bar handle.
The Handlebar is now UP from the Handlebar I bought before, which makes the riding position easier.
The texture is good for a cheap price.
Helpful?
New Custom Articles
