*FI vehicles can be used. *The installation of this product requires knowledge and skills based on the service manual issued by the manufacturer of the bike.Special tools are required for secure installation.
●Smooth handling with less rattling due to increased bearing area with tapered roller bearings.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
【What made you decide the purchase?】 I bought the Duralumin stem kit from SHIFT UP for NSR 50 First Model Type, so I wanted to improve further performance by making the Bearing Taper roller.
【How was it actually used?】 After all Taper roller is awesome! Off car is often adopted even at OEM, but compared to Ball bearing the feeling of stability is completely different. Handling also smoothes and the contact area increases and the rigid feeling also increases.
【Was it difficult to install? (Hard parts case)】 It is troubling to remove the old Race attached to the Stem. It might be a good idea to buy a special tool or ask Large Human PRO. I bought a tool and removed it myself. If you try to remove it with Graver, there is a danger of hurting the Stem, so special tools are recommended. After removing it with the Penetrating Driver on the Frame side, I pushed the old Race on the new Race in the opposite direction. Bearing on Stem side can be driven with PVC Pipe sold at Home center.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Do not forget how many millimeters to measure by measuring the thickness of the receiving side of Frame and Race when driving Race. It will be understood as the sound changes as it reaches the back, but you will not be impatient as you do not know how far you should hit it.
[Is there anything I was disappointed about?] None at all.
【Hope for Manufacturer ? Please let me know if there are any improvement points] It will be saved if the price is cheaper a little more. I think that it is useless to some extent because it attached a dedicated Dust Seal ? ? ?
【Have you compared items?】 PMC Plc : Stem Taper Bearing
[Others] Let's paint plenty of Lithium or Urea grease inside Bearing. View Detail
【What made you decide the purchase】 I bought it because I got a stuck at Center in the Stem and Wobble that goked at the time of Brake came out. I decided this Taper type without OEM Product, strength and Smooth (Refer to Impre of others) 【How was it actually used?】 Wobble is a comparison with the OEM Product that occurred, Wobble Zero, the stagnation smoothness from high rigidity. In the OEM Product, Small Size Ball is fitted in the resin receiver and it is sandwiched between upper and lower Race, Tapered Roller Bearing inserts Roller which is sturdy side by side with the receipt of Gold genus and Inner race It is a thing that holds it at Outer lace, and it is obviously a different thing. The running test is about to come, but I think I can expect Large. 【Mounting was difficult?】 For other people's imprints, we only hit the removal, but regarding installation, we use PRESS for dedicated tools and press-fitting etc. etc. Although many Hurdle 's high descriptions were many, I was aware that it was difficult, but by purchasing Small items for driving in Home center, it was easy to exchange. The Gold color Nut and Screw mountain cut short Pipe reflected in the picture were in Corner of the water supply, but in combination, I could use it instead of Drift to hit Bearing. Stainless pipe was used in combination with Gold color Nut when typing Inner race into Stem. I purchased while watching Size at Bearing, so I was able to pick things with just the right Size. 【Please tell me the installation point and hang】 The old Inner race remaining in the Stem can be removed by striking little by little with the PenetratingSlotted screwdriver. At that time, I think that Rubber seal and Washer of Gold genus will be slightly bent, but since it is bundled with Tapered Roller Bearing, there is no problem. Since detailed installation instructions are included, I think that if you read carefully and work carefully, I think that I am strong, but since it is an important part, I think that it is better to ask one who is not confident as to trustworthy Shop. [Is there anything I was disappointed about?] There was no honest expectation. 【Hope for Manufacturer - Please let me know if you have any improvement points] I am happy if it is a bit cheaper. 【Have you compared items?】 It is OEM Product (I think that it will be about 2,000 yen)View Detail
Our company Demonstration car APE100etc. The mounting This Part, Standard Spec. of "Ball bearing" (point) From "Tapered Roller Bearing" (surface) It is Parts to be. (What is it like, but .... ) The point supported Ball bearing necessarily has an area that is small, so there is a backlash. By changing it to surface supported Roller bearing "Smooth Handling" Is available. It is a Maniac Parts, but the way the handlebar breaks changes as the face is white. However, it is quite unstable because it becomes RoseRose in front when you get organized. We recommend that you place a request to Pro shop for installation.View Detail
Great product very strong. Replaces old style bearings in the Z50J1 models. Easy maintenance to remove and replace or repack with new grease.View Detail
[Webike Monitor] Since the Handle became heavy although the Front fork was changed, the goods here were also purchased together on the occasion which buys a Grease.I think that there is a degree of satisfaction as it is although felt like a Parts with honesty and a high price.
View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!