Although I tried it while trying it with Regular Specification as a thing, but Power feeling is bad, and I can not open Power unless I can not open Axel grubby.
So, fuel efficiency was bad and I ran about 35 km of litter at NORMAL, but after Bore up it fell to around 28 kilometers of litter.
So, if we decided to put it in the high octane from Regular, Power came out just by slightly opening Axel, and fuel consumption rose to an average of 33 kilograms.
EcoBore up even if you put high octane better Fing Ring, Damage to Piston may also be reducing high octane.
2007 year model ADDRESS V125 K7MODEL. Installation did.
Recently Oil leakage from Cylinder base gasket becomes severe (Traveling about 23,500 km) , I thought about trying to fix OH on my back if I repair anything, I installed Takegawa's Bore Up Kit.
In installing the Bore Up Kit this time, I was worried about how to set the burning, but BigDischargePump manufactured by another company (50% increase of fuel injection charge NORMAL) , I tried to eliminate FI Controller.
As a result, since initially it should have a strong burning, I was thinking to adjust with the Throttle position sensor, but setting seems to have come out with BigDischargePump's poning.
By the way, the Exhaust System is NORMAL and the Air cleaner has changed the intake Pipe to the thick Hose. WR is 14 Gram of DrPulley. The drive cleans every 4 to 5000 kilometers, Torque Camshaft's Grease up.
It currently runs about 1000 kilometers after OH, Idling is very stable (There is no Stall 1 degree) , Engine is very smooth to Smooth until near the highest speed. There is no such thing as to be ridiculous at a specific number of revolutions.
Regarding the driving performance, it runs lightly with a feeling like NORMAL's 30% increase over the acceleration range. We will accelerate it even after 80 km.
The high lift cam was also installed, and the low speed was weakened somewhat, in other words, there are times when the Front lifts unless you are careful with starting acceleration.
For the first time this time for me to build an Engine by myself (It is only on the waist) Although I saw it, I was able to finish it as a good engine, being helped by the good quality of Takegawa's Kit.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING