10 years ago, TAKUMI brand has launched a product with a desire of providing motorcycle covers suitable for storing your valuable motorcycle. The company continue to produce this product in Japan and made "Ver. 2" 4 years ago when a major changes were made.
It is characterized by the heat resistant double structure of the outer fabric of polyester 250 denier and the cotton broad inner but it has gained much support as a high value-added motorcycle cover and made everywhere considering the usability that does not appear in the specification.
The motorcycle cover is a "consumable" product that will be replaced when it eventually deteriorates and completes its role due to the nature of its product but our craftsmen work hard every day to be able to choose "THE NEXT MASTER".
Table of Contents
1. TAKUMI Cover Inner Structure
It has this structure when the outer polyester fabric is peeled off. It is almost black from the tank part. It is called a cotton-based broad inner, and it uses a heat-resistant cloth up to 300 degrees.
It does not damage even if you cover it after a long time riding in the summer in case of using a normal production vehicle class. (*It may be burned if you touch the catalyzer part or if it is a single-engine racer specification after running in the circuit.)
The entire surface around the handlebar is made of a very soft material called spun lace in order to protect the cowl and screen.
2. Silhouette according to style born from a thorough measures
 |
 |
The motorcycle silhouettes will differ greatly according to the style. It is necessary to change the shape of the cover depending on the type of motorcycle such as racer and naked, American motorcycle, off-road and even in road sports.
Please be sure with the measurment not only with the overall length and width but also the height measurement of the rear part of the vehicle and its highest point. Its style is divided, size is set and determined for the actual size of the motorcycle. It also has a lot of boxes, side bags, and styles.
The TAKUMI motorcycle cover Ver. 2 is available in 20 sizes in order to deliver the most suitable size on the vehicle as much as possible. It is also available for custom production.
3. Front/Back drawcord that wraps exactly the motorcycle
The motorcycle covers are versatile products. It is a matter of degree but it is better to choose something that can be put on as comfortably as possible and that does not flutter in the wind. Therefore, the front/back drawcords and lock holes exert their power. It squeezes the hem front/rear to minimize wind entanglement and intrusion of dust.
It can prevent the cover from being blown away by a strong wind through passing the lock unto the lock hole. The lock hole has a yellow front and black at the back part to make it easy to check the front and back part.
4. The color-coded handles also help distinguish between the front and back.
It is with a convenient handle to remove the cover on the front/rear. Its front is yellow and the back part is black in order to distinguish the front and back part easily just like the lock hole.
5. It is particular about the storage bag.
The storage bag is often made of fabric the same as the product but it uses a well-ventilated nylon mesh on one side assuming you store a wet cover. You won't feel uncomfortable with the water left in the bag when storing even if you remove the cover wet with night dew and put it in a bag immediately. This is recommended for those who want to keep their motorcycle cover clean in order to protect their precious motorcycle.
