DIY Attachment of B+COM for SHOEI Helmet [Weekly Review]

1-1-1.jpg Parts & Gear Reviews

You can post anything you want on Webike, including motorcycle accessories and custom parts. We are giving away up to 500 points that can be used for shopping at Webike to those who post their reviews.

We've taken the liberty of picking out some "best" reviews from August 8 to August 14, 2020, and we'd like to share it with you!

This week's pickup reviews

Used in the discarded SB5X

Rating: ★★★☆☆

しゅーかにんぷれ2-1.jpg

Use the masking tape as a guide to cut in with a leather saw.

I did it with the SB5X+Neotec 2, which the manufacturer pretends wasn't there at all.

After all, it doesn't seem to be possible to install it with bolt-on, because the USB catch part of the SB5X base plate interferes with it. So I decided to do it under the name of self-responsibility because the price of the base is also a price.

%E3%81%97%E3%82%85%E3%83%BC%E3%81%8B%E3%81%AB%E3%82%93%E3%81%B7%E3%82%8C5.jpg

It is about 3.5-4.0 mm wide and 8 mm long, but you should make it a little wider

If there is no cable compartment, it seems to be OK, so I cut the part in question in half as shown in the picture. I cut a slightly larger slit in the front to allow the cables to escape and made a crank-shaped slit to allow the microphone and speaker cables to pass through.

%E3%81%97%E3%82%85%E3%83%BC%E3%81%8B%E3%81%AB%E3%82%93%E3%81%B7%E3%82%8C4-1.jpg

I put the double-sided tape on in two places, but the top alone is enough.

I then installed the double-sided tape as instructed and attached it to the base plate after attaching the base plate to the helmet by sticking it to the cut-out area as well to make sure it was aligned at the bottom.

I also put up the antenna and of course, it doesn't interfere, and opening and closing the inner visor has no effect. It seems to be practical. Just in case, I can see "B+COM" on the plate a little bit before. Now, my SB5X seems to be able to work another time. (Mr. Haiuindo)

%E3%81%97%E3%82%85%E3%83%BC%E3%81%8B%E3%81%AB%E3%82%93%E3%81%B7%E3%82%8C3-1.jpg

Attach the base. A slit can be made in the shape of a crank so that cables can pass through.

When the helmet attachment was first introduced, I thought, "I'm sure someone will try it," and then Mr. Haiuindo tried it out for me. Although intercoms are hard to break even if you use them roughly, they are one of the gadgets that I would like to take care of, considering the price of the unit. If you have installed it on your Neotec 2, it may be a good idea to keep it around for a long time? Don't treasure your 1,000 points, just use it! Congratulations! (Webike Staff: from Kenzie)
 
 

Thank you for the wonderful review, Haiuindo! You will receive 1000 points to spend at Webike!

Webike has a special "Review" section where you can post your review of our products and services. Post a review and get up to 500 points for free, so we look forward to hearing your "real voice"!

タイトルとURLをコピーしました