Model Name:GL1000 GOLDWING
Manufacturer:HONDA
Model Year:1974
It made its debut at the Koln Show in the end of 1974. It was a made-in-Japan model with the largest engine displacement volume in those days. It mounted a horizontally opposed 4-cylinder OHC 2-valve belt driven 999cc engine.
Specifications:
[Basic spec]
| Manufacturer | HONDA | Engine Type | Water-Cooled 4 Stroke OHC 2-Valve Horizontal Opposed 4 Cylinder |
|---|---|---|---|
| Model Name | GL1000 GOLDWING | Starter | - |
| Grade | - | Maximum Output (ps) | 80ps(59.0 kw)/7500rpm |
| Drive Train | - | Maximum Torque (kgf/m) | 8.3kg-m(81.4N-m)/6500rpm |
| Model Type | - | Curb Weight | - |
| Displacement | 999 | Dry Weight | - |
| Sales Launch Year | 1974/0 | Fuel Efficiency by Catalog | - |
| Height/Width/Length | -/-/- | Fuel Tank Capacity | - |
| Seat Height | - | Distance to Empty | - |
| Front Tire Indication | - | Fuel Supply | Carburetor |
| Rear Tire Indication | - |
[Service data]
| Standard Plug | - | Chain Size | - |
|---|---|---|---|
| Number of Used Plugs | - | Chain Link Number | - |
| Engine Oil Amount | - | Battery Code | - |
| Engine Oil (Refill) | - | Headlight | - |
| Engine Oil (Element Replacement) | - | Headlight Type | - |
| Front Blinker Rating | - | Headlight Remarks | - |
| Drive Sprocket Teeth Number | - | Tail Light Rating | - |
| Driven Sprocket Teeth Number | - | Rear Blinker Rating | - |
[Machine detail]
| Motor Model Code | - | Caster Angle | - |
|---|---|---|---|
| Bore (mm) | - | Trail (mm) | - |
| Storke (mm) | - | Minimum Ground Clearance | - |
| Compression Ratio | - | Distance Between Axes | - |
| Ignition Method | - | Streering Angle (Right) | - |
| Engine Lubrication Type | - | Turning Angle (Left) | - |
| Frame Type | - | Mirror Screw Hole Diameter | 10mm |
| Minimum Rotaion Radius | - | Fuel Tank Reserve Capacity | - |
[Underbody detail]
| Front Brake Type | - | Suspension Type (Rear) | - |
|---|---|---|---|
| Front Brake Remarks | - | Number of Rear Shock Absorbers | - |
| Rear Brake Type | - | Rear Suspension Stroke | - |
| Rear Brake Remarks | - | Rear Wheel Travel | - |
| Suspension Type (Front) | - | ABS | - |
| Front Fork Type | - | Drive Train | - |
| Front Suspension Stroke | - | Differential Oil Amount | - |
| Front Fork Diameter | - | Chain Remarks | - |
[Equipment]
| Seat Lowering Allowance | - | Theft Prevention Device | - |
|---|---|---|---|
| Mirror Screw Hole Diameter | 10mm | Tail Light Bulb Type | - |
| Mirror Remarks | - | Tail Light Base Shape | - |
| Electronic Device Remarks | - | Tail Light Base Shape 2 | - |
| Fuel Gauge | Available | Tail Light Remarks | - |
| Clock | Available | Front Blinker Bulb Type | - |
| Hazard | Available | Front Blinker Base Shape | - |
[Engine detail]
| Clutch Type | - | Tappet Clearance (mm) EX | - |
|---|---|---|---|
| Transmission | - | Idling Initial Value (rpm) | - |
| Number of Gears | - | Needle Steps (Clip Location) | - |
| Gear Ratio | - | Float Level (mm) | - |
| Primary Reduction Ratio | - | Air Screw Return | - |
| Secondary Reduction Ratio | - | Main Jet Type | - |
| Variable Speed Vehicle Gear Ratio | - | Main Jet Number | - |
| Tappet Clearance (mm) IN | - |
[Other spec]
| Clutch Cable Length | - | Rear Brake Cable Length | - |
|---|---|---|---|
| Choke Cable Length | - | Other Cables | - |
| Meter Cable Length | - | Engine Number (Production Launch) | - |
| Throttle Cable Length | - | Engine Number (Production End) | - |
| Front Brake Cable Length | - |
[See Moto Index of HONDA]
[See Accessories for HONDA GL1000 GOLDWING]
