Etching Factory's radiator core guard is now available for the latest super sports CBR1000RR-R.
The radiator core guard of the etching factory is produced from stainless steel (SUS304) plate by a special technique called etching, and the finish is beautiful.
The company's core guards incorporate the know-how gained from competing in the grueling Suzuka 8-hour endurance race.
Stainless steel core guard to protect radiator
The radiator is always under severe conditions and is an important part.
If it is severely damaged, it may become impossible to drive in the worst case.
Such a situation should be avoided in both racing and street scenes.
This is why the Etching Factory Core Guard uses a layout with a finer mesh in the center and a larger mesh on both sides.
The reason for this is that the mesh in the center of the core, which is often hit by flying stones from the front tires, is finer, while the mesh on the left and right sides, which are relatively less likely to be hit from the outside, is larger to achieve both high levels of protection and cooling efficiency.
This is a recommended item for super sports users.
The center mesh of the core, which is often hit by flying stones from the front tires, is made finer, while the left and right side meshes, which are less prone to collisions, are made larger to achieve both high levels of protection and cooling efficiency.
It is also equipped with plastic plugs and rubbers to prevent damage to the radiator core during installation.
The emblems come in five colors: black, red, blue, green and yellow.
I want to choose according to the image of my car.
Also available for the new CBR1000RR-R
When radiator core guard and oil cooler guard are installed on CBR1000RR-R.
It is made of stainless steel, so it is strong enough for protection, and the finish produced by special technology etching is beautiful.
When core guard is installed on NEW CBR600RR.
It is also relatively easy to install.