KOHKEN is a manufacturer that operates a metal surface treatment (anodized) factory while assisting motorcycle customization as an authorized motorcycle distributor for the Italian brake parts manufacturer "BREMBO".
KOHKEN has a wider line up of anodized parts to match the BREMBO, including the EZ package in which BREMBO master cylinder and required parts are packaged in an easy-to-understand manner. If you're a rider who thought about improving the braking system, check this article out by all means!
Table of Contents
- 1. BREMBO Master Cylinder EZ Package
- 2. Master Cylinder Reservoir Tank Kit & Tank Bracket Kit
- 3. Mechanical Clutch Holder
- 4. Aero Lever
- 5. CNC Bleeder Cap & CNC Dial Cuff
- 6. Mechanical Switch Kit for BREMBO Master Cylinder
- 7. Collar Kit for BREMBO Radial Mount Caliper
- 8. OHLINS Upright Front Fork Caliper Support
- 9. Rear Caliper Support
- 10. Stainless Steel Parts for BREMBO
- 11. Scooter System Caliper Support
1. BREMBO Master Cylinder EZ Package
The EZ package is a product packaging with the BREMBO master cylinder and the BREMBO reservoir tank, KOHKEN bracket, and KOHKEN switch that are absolutely necessary for installation, in an easy-to-understand and affordable package!
2. Master Cylinder Reservoir Tank Kit & Tank Bracket Kit
The KOHKEN reservoir tank kit with bracket as a kit, which includes the essential reservoir tank for the installation of the BREMBO master cylinder, and the long-awaited single reservoir tank bracket, which includes mesh hose, clamp, mounting bolts are now available!
This kit is ideal for relocating the BREMBO master cylinder when switching from a naked to a full cowl model.
The committed stainless steel is used for a durable and stylish look. Both the reservoir tank kit and the reservoir tank bracket can be selected from a pipe handlebar and clip-on handlebar. Furthermore, the bracket color can be selected from two colors of black and polish, and it is possible to coordinate according to the image of the motorcycle!
3. Mechanical Clutch Holder
For those who want to make clutch operation lighter on a wire-clutch motorcycle from circuit to city rides, or those who have installed the BREMBO brake master cylinder, but are worried that the design does not match because it is a wire clutch......
This is the best match mechanical clutch holder that can be made by KOHKEN, an authorized BREMBO distributor! There are 3 types of new models [AVANZA] suitable for BREMBO Corsa Corta, [Basic] matched with RCS, [Racing] machined, and you can choose from 3 types of lever ratio of 24mm, 29mm, and 43mm that suits your motorcycle, respectively. KOHKEN also offers a free rental service for those who do not know its sizes!
4. Aero Lever
BREMBO original master lever compatible with various master cylinders and KOHKEN mechanical clutch levers! It is available in 3 different lengths: standard, middle, and short for machined duralumin.
The entire lever is designed to inherit the excellent gripping comfort of the OEM BREMBO. The back of the lever is made slimmer than the BREMBO OEM lever, which often interferes with the switch box depending on the model, reducing the risk of the lever gripping!
Furthermore, it is also possible to order anodized color unique to KOHKEN! You can choose all 16 colors anodized for an additional of around 13 USD, and all 6 colors hard anodized for an additional of around 26 USD!
5. CNC Bleeder Cap & CNC Dial Cuff
This is a bleeder dust cap with an aluminum machined cover and an original dial cuff that can be attached to a lever adjuster dial for a BREMBO RCS master cylinder! It is ideal for one-point accent of BREMBO products!
In addition, dial cuff improve its operability! With a lineup of all 17 colors, you can make an original BREMBO custom that matches the motorcycle! By the way, the bleeder cap is applicable to use for most manufacturers other than BREMBO!
 |
|
6. Mechanical Switch Kit for BREMBO Master Cylinder
A mechanical switch is absolutely required when installing the BREMBO master cylinder on a Japanese motorcycle. The RCS brake master cylinder and Corsa Corta brake master cylinder are equipped with a switch as STD, but there is no switch for other radial master cylinder or RCS clutch master cylinder.
So, we recommend KOHKEN's switch kit! With fewer failures, it is easy-to-use bolt-on installation with required machining with a highly stable Japanese waterproof mechanical switch! For the clutch, it also compatible with SUZUKI and KAWASAKI motorcycles that are difficult to connect! (It is not compatible with the 2-stages switch used for cruise control etc.)
7. Collar Kit for BREMBO Radial Mount Caliper
This is a vehicle-specific kit that includes a set of offset collar and stainless steel bolts required when mounting a BREMBO radial mount caliper with a mounting pitch of 108mm! It corresponds to various BREMBO radial calipers!
The aluminum material used for this offset color is the A7075 material called "Ultra Duralumin", which is also used in airplanes to boasts the strongest strength! It is not allowed with an incomplete set in order to support the high-end BREMBO brake caliper.
It's just a collar, but there is a lot to do with it. In fact, this product is seriously developed by KOHKEN as a professional of aluminum and a professional of BREMBO.
8. OHLINS Upright Front Fork Caliper Support
Actually, everyone is longing for OHLINS's front fork which has a deep connection with BREMBO. If you have set up an OHLINS front fork, would you like to attach a BREMBO caliper with it?
The great popularity of BREMBO 4POT 40mm pitch caliper series can be installed, and it is a lineup that corresponds to a large diameter disc from a big naked normal disc with well-established for customizing!
It is perfectly design at the bottom of the OHLINS upright front fork! Since it is possible to order with anodized color, changing color to match with the motorcycle is also possible!
9. Rear Caliper Support
For the BREMBO rear caliper, 84mm pitch 2POT caliper is known not only for CNC calipers but also for the new and old brake calipers. This is caliper support for installing BREMBO caliper to the rear of the most popular Big Naked motorcycle for customizing. There are also popular Z900RS and for the new KATANA version!
Normally, the rear caliper on the top is attached to the bottom to make it more stylish! In order not to dishonor the name of an authorized BREMBO distributor, it has been produced with precisely machined aluminum without futility! Other than the STD black anodized, it is possible to order a color with anodizing! You can request according to the image of the motorcycle!
10. Stainless Steel Parts for BREMBO
These OEM BREMBO parts such as the pivot pin of the BREMBO master cylinder, the pad pin of the caliper and the bleeder bolt attached to each part are actually all made of iron. Eventually, it will get rusty and will not move smoothly when using or there will be visual problems. So why not replace it with the stainless steel parts made by KOHKEN?
By applying a titanium coat on the surface that will be fashionable at one point and a black X coat (anodizing treatment) that looks almost the same as STD, it will be more resistant to corrosion and maintain a beautiful condition! This is a series that we would like you to consider together when purchasing BREMBO parts.
 |
 |
 |
11. Scooter System Caliper Support
 |
 |
It is not just for big motorcycles! We also have a lineup of caliper supports for the very popular YAMAHA XMAX, NMAX, MAJESTY-S and HONDA's Super Cub C125!
The customizing of CUBs and scooters is profound. The BREMBO brand doesn't just exist for racing motorcycles! Of course, you can also order additional colors with anodized!
See Accessories of BREMBO
See Accessories of KOHKEN
See Accessories of OHLINS
See HONDA Moto Index Page
See SUZUKI Moto Index Page
See KAWASAKI Moto Index Page
See YAMAHA Moto Index Page
See Accessories for HONDA Super Cub C125
See Accessories for SUZUKI KATANA
See Accessories for KAWASAKI Z900RS
See Accessories for YAMAHA NMAX
See Accessories for YAMAHA XMAX250
See Accessories for YAMAHA Majesty S (XC155)
